Mains Plug Warning | DOD SR830ZXLR, SR431QXLR, SR831QXLR, SR430QXLR

These symbols are internationally accepted symbols that warn of potential hazards with electrical products.The lightning flash means that there are dangerous voltages present within the unit.The exclamation point indicates that it is necessary for the user to refer to the owners manual.

These symbols warn that there are no user serviceable parts inside the unit. Do not open the unit. Do not attempt to service the unit yourself. Refer all servicing to qualified personnel. Opening the chassis for any reason will void the manufacturer’s warranty. Do not get the unit wet. If liquid is spilled on the unit, shut it off immediately and take it to a dealer for service.

Disconnect the unit during storms to prevent damage.

U.K. Mains Plug Warning

A molded mains plug that has been cut off from the cord is unsafe. Discard the mains plug at a suitable facility. Never under any circum-

stances should you insert a damaged or cut mains plug into a 13

amp power socket. Do not use the mains plug without the fuse cover in place. Replacement fuse covers can be obtained from your local retail- er. Replacement fuses are 13 amps and MUST be ASTA approved to BS1362.

Warning

For your protection, please read the following:

Water and Moisture: Appliances should not be used near water (e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.) Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

Power Sources: The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

Grounding or Polarization: Precautions should be taken so that the grounding or polarization means of an appliance is not defeated.

Power Cord Protection: Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

Servicing: To reduce the risk of fire or electrical shock, the user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

For units equipped with externally accessible fuse recepta-

cle: Replace fuse with same type and rating only.

Safety Instructions

Notice for customers if your unit is equipped with a power cord.

Warning:This appliance must be earthed.

The cores in the mains lead are colored in accordance with the following code:

Green and Yellow - Earth Blue - NeutralBrown - Live

As colors of the cores in the mains lead of this appliance may not corre- spond with the colored markings identifying the terminals in your plug, pro- ceed as follows:

•The core which is colored green and yellow must be connected to the terminal in the plug marked with the letter E, or with the earth sym- bol, or colored green, or green and yellow.

•The core which is colored blue must be connected to the terminal marked N, or colored black.

•The core which is colored brown must be connected to the terminal marked L, or colored red.

This equipment may require the use of a different line cord, attachment plug, or both, depending on the available power source at installation. If the attachment plug needs to be changed, refer servicing to qualified service personnel who should refer to the table below.The green/yellow wire shall be connected directly to the unit’s chassis.

CONDUCTOR		WIRE COLOR
		Normal	Alt
L	LIVE	BROWN	BLACK
N	NEUTRAL	BLUE	WHITE
E	EARTH GND	GREEN/YEL	GREEN

Warning: If the ground plug is defeated, certain fault conditions in the unit or in the system to which it is connected can result in full line voltage between chassis and earth ground. Severe injury or death can then result if the chassis and earth ground are touched simultaneously.

Electromagnetic Compatibility

Operation is subject to the following conditions: •This device may not cause harmful interference.

•This device must accept any interference received, including interference that may cause undesired operation.

•Use only shielded interconnecting cables.

•Operation of this unit within significant electromagnetic fields should be avoided.

SR430QXLR, SR830ZXLR, SR831QXLR, SR 231QX, SR 430QX, SR 431QX, SR 830QX, SR 831QX, SR431QXLR specifications

The Department of Defense (DoD) has developed a range of advanced technologies and systems under the SR designation that cater to various operational requirements. Among these, the SR830ZXLR, SR430QXLR, SR231QX, SR430QX, SR431QX, SR830QX, SR831QX, SR431QXLR, and SR831QXLR stand out for their unique features and capabilities, each engineered to meet specific mission demands.

The SR830ZXLR is notable for its exceptional processing power and advanced sensor integration. It is equipped with state-of-the-art electronics that allow for real-time data analysis and decision-making. Its long-range communication capabilities ensure seamless information flow, making it an indispensable asset in high-stakes environments.

The SR430QXLR model focuses on enhanced surveillance and reconnaissance tasks. It boasts cutting-edge imaging technologies that support various weather conditions and terrain. The onboard analytics can process and relay critical information to command centers, enhancing situational awareness during operations.

For versatility, the SR231QX provides a balanced approach to performance and durability. It is designed to operate in a multitude of environments, from arid deserts to harsh arctic conditions. Its rugged design ensures longevity and reliability, making it a staple for both ground and air operations.

The SR430QX offers an improved platform for data processing and warfare simulation. With its modular architecture, it can adapt to a multitude of mission requirements, integrating new technologies as they become available. The SR431QX expands on this capability with added features for enhanced maneuverability and combat readiness.

The SR830QX and SR831QX are primarily focused on offensive capabilities, optimized for rapid deployment and engagement. Their lightweight design allows for quick transport, while their advanced weapon systems ensure they are always mission-ready.

The SR431QXLR and SR831QXLR emphasize long-range operational capabilities. These models incorporate advanced propulsion systems that extend their range and endurance, making them suitable for extended missions without the need for frequent resupply.

Together, these SR systems embody the DoD's commitment to leveraging technology for superior operational effectiveness. Each model is a testament to advanced engineering and design, ensuring that U.S. forces maintain an edge in diverse and dynamic combat environments.