Motorola NNTN6893B manual Activating your Mike Account, Powering On and Off, Getting Started

Models: NNTN6893B

1 36
Download 36 pages 43.64 Kb
Page 12
Image 12

Getting Started

Lithium Ion batteries have a self discharge rate and without use, lose about 1% of their charge per day.

The battery capacity is degraded if the battery is stored for long periods while fully charged. If long term storage is required, store at half capacity.

Activating your Mike Account

Before you can begin using your i580 handset, you need to activate your Subscriber Identity Module (SIM) card on The Mike Network. Your SIM card holds the information required to enable your handset to connect to The Mike Network. It also stores your user information, language preference and contact list entries.

If you purchased your handset through an Authorized Mike Network Dealer, your SIM should already be active.

If you purchased your handset at another location, follow the “Getting Activated” instructions in the Mike Services User’s Guide.

Powering On and Off

The first time you power your handset on, a screen may appear asking you to update your browser information. This means you must enable security.

To power your handset on:

1Open the flip.

2Press p.

Note: When powering on, if you press p for more than 5 seconds, you will turn off calls and other transmissions.

To power your handset off:

1Open the flip.

2Press and hold p.

When You Power On For the First Time

If the Enter SIM PIN Code screen appears, enter your SIM PIN. See “Entering the PIN” on page 12. Press A under Ok.

Note: When you receive your handset, the SIM PIN is 0000. Change your PIN to prevent fraudulent use of the SIM card (see “Changing the PIN” on page 12).

6

Page 12
Image 12
Motorola NNTN6893B, H83XAH6RR4AN Activating your Mike Account, Powering On and Off, When You Power On For the First Time