2Remove Battery and SIM card (if so equipped) from radio product.

3Shake excess liquid from radio product.

4Place the radio product and battery in an area that is at room temperature and has good air flow.

5Let the radio product, battery, and SIM card dry for 72 hours before reconnecting the battery and/or powering on the radio product.

If the radio product does not work after following the steps listed above, contact your dealer for servicing information.

Clean the external surfaces of the radio product with a damp cloth, using a mild solution of dishwashing detergent and water. Some household cleaners may contain chemicals that could seriously damage the radio product. Avoid the use of any petroleum-based solvent cleaners. Also, avoid applying liquids directly on the radio product.

Accessory Safety Information

Important: Save these accessory safety instructions.

Accessory Safety Information

Before using any battery or battery charger, read all the instructions for and cautionary markings on (1) the battery, (2) the battery charger, which may include a separate wall-mounted power supply or transformer, and (3) the radio product using the battery.

Do not expose any battery charger to water, rain, or snow as they are designed for indoor or in-vehicle use only.

Warning: To reduce the risk of injury,

!charge only the rechargeable batteries described in “Battery” on page 3. Other types of batteries may burst, causing personal injury and damage.

To reduce the risk of damage to the cord or plug, pull by the plug rather than the cord when you disconnect the battery charger from the power source outlet.

Do not operate any battery charger with a damaged cord or plug — replace them immediately.

Battery chargers may become warm during operation, but not hot. If it becomes hot to the touch, unplug it from the power outlet immediately and discontinue its use.

25

Page 31
Image 31
Motorola H83XAH6RR4AN, NNTN6893B manual Accessory Safety Information