Mains Plug Warning | DOD SR835 specification

These symbols are internationally accepted symbols that warn of potential hazards with electrical products.The lightning flash means that there are dangerous voltages present within the unit.The exclamation point indicates that it is necessary for the user to refer to the owners manual.

These symbols warn that there are no user serviceable parts inside the unit. Do not open the unit. Do not attempt to service the unit yourself. Refer all servicing to qualified personnel. Opening the chassis for any reason will void the manufacturer’s warranty. Do not get the unit wet. If liquid is spilled on the unit, shut it off immediately and take it to a dealer for service.

Disconnect the unit during storms to prevent damage.

U.K. Mains Plug Warning

A molded mains plug that has been cut off from the cord is unsafe. Discard the mains plug at a suitable facility. Never under any circum-

stances should you insert a damaged or cut mains plug into a 13

amp power socket. Do not use the mains plug without the fuse cover in place. Replacement fuse covers can be obtained from your local retail- er. Replacement fuses are 13 amps and MUST be ASTA approved to BS1362.

Warning

For your protection, please read the following:

Water and Moisture: Appliances should not be used near water (e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.) Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

Power Sources: The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

Grounding or Polarization: Precautions should be taken so that the grounding or polarization means of an appliance is not defeated.

Power Cord Protection: Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

Servicing: To reduce the risk of fire or electrical shock, the user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

For units equipped with externally accessible fuse recepta-

cle: Replace fuse with same type and rating only.

Safety Instructions

Notice for customers if your unit is equipped with a power cord.

Warning:This appliance must be earthed.

The cores in the mains lead are colored in accordance with the following code:

Green and Yellow - Earth Blue - NeutralBrown - Live

As colors of the cores in the mains lead of this appliance may not corre- spond with the colored markings identifying the terminals in your plug, pro- ceed as follows:

•The core which is colored green and yellow must be connected to the terminal in the plug marked with the letter E, or with the earth sym- bol, or colored green, or green and yellow.

•The core which is colored blue must be connected to the terminal marked N, or colored black.

•The core which is colored brown must be connected to the terminal marked L, or colored red.

This equipment may require the use of a different line cord, attachment plug, or both, depending on the available power source at installation. If the attachment plug needs to be changed, refer servicing to qualified service personnel who should refer to the table below.The green/yellow wire shall be connected directly to the units chassis.

CONDUCTOR		WIRE COLOR
		Normal	Alt
L	LIVE	BROWN	BLACK
N	NEUTRAL	BLUE	WHITE
E	EARTH GND	GREEN/YEL	GREEN

Warning: If the ground plug is defeated, certain fault conditions in the unit or in the system to which it is connected can result in full line voltage between chassis and earth ground. Severe injury or death can then result if the chassis and earth ground are touched simultaneously.

Electromagnetic Compatibility

Operation is subject to the following conditions: •This device may not cause harmful interference.

•This device must accept any interference received, including interference that may cause undesired operation.

•Use only shielded interconnecting cables.

•Operation of this unit within significant electromagnetic fields should be avoided.

SR835 specifications

The DOD SR835 is a cutting-edge device designed to enhance communication and data transmission within military operations. It represents the latest advancements in secure and robust technology tailored to meet the unique demands of defense applications.

One of the primary features of the DOD SR835 is its exceptional signal encryption capabilities. Utilizing advanced cryptographic algorithms, this device ensures that sensitive information remains confidential during transmission. Its encryption standards align with the latest regulations set forth by the Department of Defense, making it a reliable choice for military and defense operations.

The SR835 is built upon a resilient hardware platform designed to withstand the rigors of military environments. Its rugged casing enables it to operate effectively in extreme temperatures, humidity, and shock, ensuring dependable performance even in harsh conditions. The design also incorporates advanced thermal management systems, allowing for operation over extended periods without overheating.

In terms of connectivity, the DOD SR835 supports multiple communication protocols, including both legacy systems and contemporary networks. This versatility allows for seamless integration with various command and control systems, ensuring interoperability among different military branches and enhancing situational awareness.

One of the standout technologies featured in the SR835 is its ability to utilize frequency hopping spread spectrum (FHSS) technology. FHSS enhances security by rapidly changing frequencies during communication, making it difficult for adversaries to intercept or jam signals. This capability is crucial in contemporary warfare where electronic warfare threats are prevalent.

Furthermore, the device is equipped with advanced data compression algorithms, reducing bandwidth requirements without compromising the quality or integrity of the information transmitted. This allows for more efficient use of communication channels, enabling troops to send and receive critical data quickly and reliably, even in congested environments.

Operational flexibility is another key characteristic of the DOD SR835. The device can be deployed in various configurations, ranging from handheld units to larger, vehicle-mounted versions, providing versatility across different mission profiles. Its user-friendly interface simplifies operation, allowing personnel to focus on their primary tasks instead of navigating complex technology.

Ultimately, the DOD SR835 embodies the innovative spirit of modern military technology, combining robust security features, resilient design, and versatile functionality to meet the challenges faced by armed forces today. As demands for secure, reliable communication continue to grow, devices like the SR835 will play an essential role in ensuring mission success on the battlefield.