DOD SR835 Stereo Equalizer - User Manual and Specifications

SR835 Crossover

Begin sending signal through the system. Gradually increase the High, then Mid, and finally Low Levels in order checking for correct wiring. Then balance the tonality of the source signal.You may also need to increase the Gain if a stronger signal is required.

STEREO USING A MONO SUB-WOOFER

The setup procedure is the same as for the stereo bi amp application, except that instead of connecting both low frequency outputs, connect only the Low Frequency Sum output to the low frequency amplifier. Set both Channel 1 and Channel 2 Low Level controls to the same level to ensure that both controls

contribute the same amount of signal to the Low Frequency Sum output.

MAINTENANCE AND SERVICING

There are NO user serviceable parts inside the units. Opening the chassis will void the warranty. All service and repair must be performed by the factory or an authorized service center for the warranty to remain in service.

Should a problem arise with the equalizer, please contact your authorized DOD Electronics dealer for return/repair procedures.

SPECIFICATIONS

Frequency Response: 10Hz. to 22kHz +0/-0.5 dB.

THD+Noise: Less than 0.006%.

Signal-To-Noise Ratio: Greater than -90 dB

Filter Type: 18 dB/octave Butterworth state-variable filters.

Crossover Frequencies -

Stereo: LOW/HIGH: 100 Hz to 10 kHz in two ranges. -

Mono: LOW/MID 100 Hz to 10 kHz in two ranges. MID/HIGH 100 Hz to 10 kHz in two ranges.

Input Impedance: 20 k Ω unbalanced, 40 K Ω balanced.

Maximum Input Level: +21 dBu (ref.: 0.775 Vrms).

Output Impedance: 51Ω unbalanced/102 Ω balanced.

Maximum Output Level: +21 dBu (ref.: 0.775 Vrms).

Dimensions: 19”(L) x 5”(W) x 1.75”(H).

Weight: 4.38 lbs.

SR835 specifications

The DOD SR835 is a cutting-edge device designed to enhance communication and data transmission within military operations. It represents the latest advancements in secure and robust technology tailored to meet the unique demands of defense applications.

One of the primary features of the DOD SR835 is its exceptional signal encryption capabilities. Utilizing advanced cryptographic algorithms, this device ensures that sensitive information remains confidential during transmission. Its encryption standards align with the latest regulations set forth by the Department of Defense, making it a reliable choice for military and defense operations.

The SR835 is built upon a resilient hardware platform designed to withstand the rigors of military environments. Its rugged casing enables it to operate effectively in extreme temperatures, humidity, and shock, ensuring dependable performance even in harsh conditions. The design also incorporates advanced thermal management systems, allowing for operation over extended periods without overheating.

In terms of connectivity, the DOD SR835 supports multiple communication protocols, including both legacy systems and contemporary networks. This versatility allows for seamless integration with various command and control systems, ensuring interoperability among different military branches and enhancing situational awareness.

One of the standout technologies featured in the SR835 is its ability to utilize frequency hopping spread spectrum (FHSS) technology. FHSS enhances security by rapidly changing frequencies during communication, making it difficult for adversaries to intercept or jam signals. This capability is crucial in contemporary warfare where electronic warfare threats are prevalent.

Furthermore, the device is equipped with advanced data compression algorithms, reducing bandwidth requirements without compromising the quality or integrity of the information transmitted. This allows for more efficient use of communication channels, enabling troops to send and receive critical data quickly and reliably, even in congested environments.

Operational flexibility is another key characteristic of the DOD SR835. The device can be deployed in various configurations, ranging from handheld units to larger, vehicle-mounted versions, providing versatility across different mission profiles. Its user-friendly interface simplifies operation, allowing personnel to focus on their primary tasks instead of navigating complex technology.

Ultimately, the DOD SR835 embodies the innovative spirit of modern military technology, combining robust security features, resilient design, and versatile functionality to meet the challenges faced by armed forces today. As demands for secure, reliable communication continue to grow, devices like the SR835 will play an essential role in ensuring mission success on the battlefield.