Installation, For 1/4 Mono Phone Plug Connection

4 SR835 Crossover

INSTALLATION

Install the crossover in a rack with the provided rack screws. Route the AC power cord to a convenient power outlet away from audio lines. The unit may be turned on and off using the front panel power switch. Since the units draw a relatively small amount of current during idle, they can be left on continuously.

DOD crossovers generate very little heat during operation and thus do not need to be specially ventilated or cooled. The units should not, however, be sub- jected to high temperatures for extended periods. Although the unit's chassis is shielded against radio frequency and electromagnetic interference, extremely high RF and EMI fields should be avoided.

ATTENTION: Use only one Channel output connector for each frequency range at a time. Using the balanced and unbalanced outputs for the same fre- quency range at the same time can unbalance balanced lines, cause phase can- cellation, short a conductor to ground, or cause damage to other equipment connected to the crossover.

FOR BALANCED 1/4 “ TRS PHONE PLUG CONNECTION - Wire the con- nectors as follows:

Phone Plug	Connection
tip	: high
ring	: low
sleeve	: ground

FOR 1/4" MONO PHONE PLUG CONNECTION:

Phone Plug	Connection
tip	: high
sleeve	: ground

Once the crossover has been installed and adjusted for the required cross fre- quencies, and levels, an optional security panel can be installed to keep unautho- rized persons from changing settings.

SR835 specifications

The DOD SR835 is a cutting-edge device designed to enhance communication and data transmission within military operations. It represents the latest advancements in secure and robust technology tailored to meet the unique demands of defense applications.

One of the primary features of the DOD SR835 is its exceptional signal encryption capabilities. Utilizing advanced cryptographic algorithms, this device ensures that sensitive information remains confidential during transmission. Its encryption standards align with the latest regulations set forth by the Department of Defense, making it a reliable choice for military and defense operations.

The SR835 is built upon a resilient hardware platform designed to withstand the rigors of military environments. Its rugged casing enables it to operate effectively in extreme temperatures, humidity, and shock, ensuring dependable performance even in harsh conditions. The design also incorporates advanced thermal management systems, allowing for operation over extended periods without overheating.

In terms of connectivity, the DOD SR835 supports multiple communication protocols, including both legacy systems and contemporary networks. This versatility allows for seamless integration with various command and control systems, ensuring interoperability among different military branches and enhancing situational awareness.

One of the standout technologies featured in the SR835 is its ability to utilize frequency hopping spread spectrum (FHSS) technology. FHSS enhances security by rapidly changing frequencies during communication, making it difficult for adversaries to intercept or jam signals. This capability is crucial in contemporary warfare where electronic warfare threats are prevalent.

Furthermore, the device is equipped with advanced data compression algorithms, reducing bandwidth requirements without compromising the quality or integrity of the information transmitted. This allows for more efficient use of communication channels, enabling troops to send and receive critical data quickly and reliably, even in congested environments.

Operational flexibility is another key characteristic of the DOD SR835. The device can be deployed in various configurations, ranging from handheld units to larger, vehicle-mounted versions, providing versatility across different mission profiles. Its user-friendly interface simplifies operation, allowing personnel to focus on their primary tasks instead of navigating complex technology.

Ultimately, the DOD SR835 embodies the innovative spirit of modern military technology, combining robust security features, resilient design, and versatile functionality to meet the challenges faced by armed forces today. As demands for secure, reliable communication continue to grow, devices like the SR835 will play an essential role in ensuring mission success on the battlefield.