SR835 Crossover5, BI-AMP Applications

SR835 Crossover5

BI-AMP APPLICATIONS

For bi amp applications, the SR835 must be set to the Stereo mode regardless of whether you are running in stereo or mono. The Stereo mode configures the SR835 as two individual channels, each providing a two way split. If you are run- ning your sound system in stereo, both channels would be used: one for the left, and one for the right. If you are running in mono, only one of these channels would be used but the SR835 would still be set to Stereo mode in order to achieve a two way split. The following procedure outlines the steps for running a bi-amped system in mono. Begin these steps with the power to the SR835 turned off.

1.Make sure the Mono Mode switch on the front panel of the SR835 is in the “out” position. The LED next to this switch should be off.

2.Turn the Channel 1 Gain knob to 0 (fully counterclockwise).

3.Set the Channel 1 Low and High Level knobs to - infinity (fully counterclock- wise clockwise).

4.Connect from the output of the mixer or source signal to the Channel 1 input of the SR835.

5.Connect from the Channel 1 Low Bal (for balanced lines), or Low Unbal (for unbalanced lines) to the input of the power amp driving the bass speakers.

6.Connect from the Channel 1 High Bal (for balanced lines), or High Unbal (for unbalanced lines) to the input of the power amp driving the horns or high fre- quency speakers.

7.Consult the manufacturers specifications for your speakers to determine the proper crossover frequency. This will usually be listed as the frequency response or frequency range of your high frequency speakers or horns. Set the Channel 1 Frequency knob slightly higher than the lowest specified fre- quency.

Note: The markings on the SR835 Frequency knob range from 100 Hz. to 1000 Hz..The push button switch to the left of the Frequency knob will multi- ply these frequencies by 10 extending the range from 1000 Hz. to 10,000 Hz..

8.Apply power to your mixer, then to the SR835, and finally to your power amps.

Begin sending signal through the system. Gradually turn up the High Level first and confirm correct wiring.Turn up the Low Level to balance the tonality.Adjust the Gain knob for appropriate signal strength.

Note: This procedure will also apply to Stereo bi-amping. Simply repeat steps2 through 7 for Channel 2.

SR835 specifications

The DOD SR835 is a cutting-edge device designed to enhance communication and data transmission within military operations. It represents the latest advancements in secure and robust technology tailored to meet the unique demands of defense applications.

One of the primary features of the DOD SR835 is its exceptional signal encryption capabilities. Utilizing advanced cryptographic algorithms, this device ensures that sensitive information remains confidential during transmission. Its encryption standards align with the latest regulations set forth by the Department of Defense, making it a reliable choice for military and defense operations.

The SR835 is built upon a resilient hardware platform designed to withstand the rigors of military environments. Its rugged casing enables it to operate effectively in extreme temperatures, humidity, and shock, ensuring dependable performance even in harsh conditions. The design also incorporates advanced thermal management systems, allowing for operation over extended periods without overheating.

In terms of connectivity, the DOD SR835 supports multiple communication protocols, including both legacy systems and contemporary networks. This versatility allows for seamless integration with various command and control systems, ensuring interoperability among different military branches and enhancing situational awareness.

One of the standout technologies featured in the SR835 is its ability to utilize frequency hopping spread spectrum (FHSS) technology. FHSS enhances security by rapidly changing frequencies during communication, making it difficult for adversaries to intercept or jam signals. This capability is crucial in contemporary warfare where electronic warfare threats are prevalent.

Furthermore, the device is equipped with advanced data compression algorithms, reducing bandwidth requirements without compromising the quality or integrity of the information transmitted. This allows for more efficient use of communication channels, enabling troops to send and receive critical data quickly and reliably, even in congested environments.

Operational flexibility is another key characteristic of the DOD SR835. The device can be deployed in various configurations, ranging from handheld units to larger, vehicle-mounted versions, providing versatility across different mission profiles. Its user-friendly interface simplifies operation, allowing personnel to focus on their primary tasks instead of navigating complex technology.

Ultimately, the DOD SR835 embodies the innovative spirit of modern military technology, combining robust security features, resilient design, and versatile functionality to meet the challenges faced by armed forces today. As demands for secure, reliable communication continue to grow, devices like the SR835 will play an essential role in ensuring mission success on the battlefield.