Philips 64PP9751 manual ADD/DELETE Channels, Select Channel Memory, Press the Channel +

	FEATURE MENU CONTROLS (CONTINUED)
	ADD/DELETE CHANNELS
	uto-Programming (see
	Aprevious page) adds all the
	channels it can find (on your
	Antenna or Cable TV system) into
	the TV's memory. Add/Delete
	Channels makes it easy for you to
	add other channels, or drop
	unwanted channels, from the list of
	channels in the TV's memory.
		MAIN MENU
1	Select CHANNEL MEMORY	PICTURE	SOUND
	(ADD/DELETE CHANNELS)	FEATURES				FEATURE MENU
	control.
	With the FEATURES MENU (1	1ST TIME SETUP		EXIT		ANALOG	CABLE
						FORMAT	TUNING
	of 5) on screen, move the RED					CLOSED	CHANNEL
	highlight with the MENU
						CAPTIONS	MEMORY
	buttons. Then press the MENU (or
	ok) button to select the feature.					EXIT	MORE...
							1 OF 5
2 Press the CHANNEL (+)/(-)
	(or number buttons on the Pronto’s
	touchscreen 2 of 5) to select the	DN		mute
		1
	channel you want to add or delete.			channel		CHANNEL MEMORY
			HDR PTV	+
3	Press the MENU ▶ button to	Menu	Source			ADD/DELETE
				volume		CHANNELS
	ADD the channel into the TV's			+		2
			ok
	memory.					START
						AUTO-PROGRAMMING
	Press the MENU ◀ button to	Exit
		3/5 INFO	A/CH	1		EXIT
	DELETE the channel from
					3
	memory.	4
	Repeat steps 2 and 3 for each
	channel you wish to add or delete.
4 Press the Exit button to clear the
	screen when through.					ADD/DELETE CHANNEL
							Channel 19 Added
							for ANT A
							SELECT CHANNEL
							to DELETE CHANNEL
	SMART HELP					SOURCE	for ANT B
						M	when FINISHED
	Remember. A separate
	ADD/DELETE CHANNEL
	memory may also be created for
	the ANT(enna) B Input on the rear
	of the set (if an Antenna or Cable
	TV signal has been connected).
	Press the “SOURCE” button on
	the remote, while in the
	ADD/DELETE CHANNEL
	mode, to switch between the ANT
	A and ANT B channel memory
	lists. Then follow steps 2 and 3 as
	shown above to add or delete the
	desired channels.
			14