H9820UD_IB_EN_1_0210 2/14/05 11:16 AM Page 14
English
14Hookups (cont’d)
DVD/VCR to a TV and to a Stereo that is Dolby
Using Digital Audio connections
1Antenna/Cable TV Signal
DVD | DVD/VCR VCR |
DIGITAL | AUDIO | COMPONENT | AUDIO OUT AUDIO IN | ||
VIDEO OUT | |||||
AUDIO OUT | OUT | OUT | Y | L | L |
|
|
| |||
| L |
| CB / |
|
|
|
|
| R | R | |
COAXIAL |
|
| PB | ||
R |
|
| VIDEO OUT VIDEO IN |
| |
|
| CR / |
| ||
|
|
|
|
| |
|
|
| PR |
|
|
Stereo |
|
|
|
| 3 |
| 2 |
| |||
COAXIAL |
|
| |||
|
|
|
|
| |
DIGITAL |
|
|
|
|
|
AUDIO IN |
|
|
|
|
|
Back of TV
(example only)
ANT - IN
VIDEO IN
1 Connect the antenna or Cable TV signal to the
2 Connect a coaxial digital audio cable (not supplied) to the DVD/VCR’s COAXIAL DIGITAL AUDIO OUT jack and to the COAXIAL DIGITAL AUDIO IN jack on the Stereo.
This digital audio connection only provides sound for the DVD Player of the DVD/VCR. So, in order to use the VCR features or hear TV channels at the DVD/VCR, you still need to either connect the RF coaxial cable between the
3 Connect the supplied yellow video cable to the yellow DVD/VCR VIDEO OUT jack on the DVD/VCR and to the VIDEO IN jack on the TV. To use component video cable or
page 12.You will still need the yellow video cable or RF coaxial cable for VCR features.
4 Plug in the power cords of the Stereo,TV, and DVD/VCR.Turn on the Stereo and select its Auxiliary IN channel.Turn on the TV and set it to the correct Video In channel. Go to your TV’s lowest channel (01 or 02) and change channels downward until you see DVD or VCR material on the TV screen. To help you find the right Video In channel on the TV, turn on the DVD/VCR. Press DVD to put the DVD/VCR in DVD mode.With no Disc in the Player, a large DVD Video logo will appear on the TV screen when you get the TV on the correct Video In channel.
Make sure PROGRESSIVE is OFF and P.SCAN does not appear on the DVD/VCR’s display panel. Disable Progressive Scan either in the DISPLAY menu or by pressing and holding PLAY B (DVD) on the front of the DVD/VCR for more than 5 seconds. Details are on pages 8 and
5 You are ready to turn on the DVD/VCR. Go to page 16 before turning on the DVD/VCR.
Remember...
Some DVDs are recorded in Dolby Digital 5.1 channel Surround Sound. Select Dolby Digital 5.1 channel Surround Sound in the DVD Disc menu. If Dolby Digital Surround Sound is not recorded on the Disc, you will not have surround sound available.
If you connect the DVD/VCR to a Dolby Digital Stereo, set DOLBY DIGITAL to BITSTREAM in the DVD Player’s Setup menu. Details are on page 55. If the DVD/VCR is not connected to a Dolby
Incorrect settings may cause noise distortion and damage the speakers.