Philips DVP3050V/37B Videotape Recording, Recording Prevention, To stop recording, press Stop C

Page 24

H9820UD_IB_EN_1_0210 2/14/05 11:16 AM Page 24

English

24Videotape Recording

Read and follow the steps below to record a television program onto a videotape.

●Before you begin, make sure the DVD/VCR is in VCR mode. Press VCR so VCR light appears on the front of the DVD/VCR.

1 Turn on the TV and set it to channel 3 or 4 or the Video In channel. If you connected the DVD/VCR to the TV using the supplied audio and video cables, select your TV’s Video In channel. Details are on page 12.

If you connected the DVD/VCR to the TV using the supplied RF coaxial cable, choose channel 3 (or 4) at the TV. Details are on pages 9-11.

2 Insert a tape with its record tab intact into the cassette compartment of the DVD/VCR. If tape playback begins, press STOP C.

3 Press SPEED until the desired tape speed (SP or SLP) appears briefly on the screen. Details about tape speed are on page 60.

4 Press SKIP ∑/CH K or SKIP w/CH L or the

Number buttons to select the TV channel to record.

5 Press RECORD I to start recording. “REC” will appear on the DVD/VCR’s display panel.

6 To pause the recording, press PAUSE k once. “REC” will flash. To resume recording, press RECORD I or press PAUSE k again. “REC” will reappear.

7 To stop recording, press STOP C.

Recording Prevention

Video cassettes have record tabs to ensure that recordings are not accidentally erased.

1 To prevent recording, break off the tab with a screwdriver.

2 To allow recording, cover the hole with clear tape.

Remove the

 

Cover the

tab to prevent

 

hole to allow

recording.

 

recording.

 

1 Turn on the TV.

2 Insert a tape in the DVD/VCR.

 

 

 

STANDBY-ON

 

 

SEARCH

MODE

DISPLAY

 

 

REPEAT REPEAT

AUDIO

 

4

 

 

A-B

 

 

 

SUBTITLE

ZOOM

ANGLE

SKIP / CH

 

RETURN

TITLE CLEAR/RESET SLOW

 

VCR

VCR/TV

DVD

 

 

DISC/VCR

 

 

SYSTEM

 

 

MENU

 

 

MENU

 

7

 

OK

 

 

6

STOP

PLAY

PAUSE

 

TIMER SET

MARKER

RECORD

 

3

SPEED

 

 

 

 

 

1

2

3

 

4

5

6

7

 

4

8

9

0

+10

 

5-6

Helpful Hints

•Other recording options are on pages 25-30.

•The VCR will record in a preset volume.

•Pause will switch to Stop after 5 minutes to protect the VCR and the tape from damage.

When a recording is paused, review the pause time remaining with the ■ marks on the screen. Each ■ mark equals

1 minute remaining. During the last minute of paused recording, the ■ mark will flash.

•If any menu is on the TV screen, RECORD I on the remote does not function. Press CLEAR/RESET to remove the menu.Then, press RECORD I. Or, use RECORD I on the front of the DVD/VCR.

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Digital Video Disc Player Proof of Purchase For Customer UseSafety Precautions Declaration of ConformityBox Marietta, GAImportant Safety Instructions Safety Information cont’dTable of Contents Introduction Playable Discs and Video Cassettes Hookups Determining the best possible connectionHookups cont’d Connections RememberSignal CableRF coaxial cable TV’s Antenna Jack of your DVD/VCR DVD/VCR Audio OUT jacks on the DVD/VCR and to the redComposite, or Baseband video Video OUT jacks on the DVD/VCR and to the ComponentDVD/VCR to a TV and a Stereo Check your Stereo manual for detailsStereo Putting Batteries in the Remote Control Using the Remote ControlRecycling Guidelines/Battery Safety First-time DVD/VCR Setup Other tape playback features are on pages Video Cassette PlaybackRead and follow the steps below to play a tape Turn on the TV Insert a tape in the DVD/VCRDisc Playback Press OPEN/CLOSE aOn the DVD/VCR Insert a DiscDisplay Panel DVD Display PanelVCR Display Panel Display MessagesRemote Control Front PanelRear Panel Channel Setup Adding/Deleting ChannelsPress CLEAR/RESET or B to start the clock Clock VCRWhile the DAY space is flashing, press K or L until While the Year space is flashing, press K or LPress CLEAR/RESET to remove the menu Language VCRVCR Status Displays Press Display again to remove all the displaysVideotape Recording Recording PreventionTo stop recording, press Stop C Use the TV remote control to select the channel Remote control to return to channel 03 or 04 atPress VCR/TV on the DVD/VCR remote control to Press VCR, then press Record I to recordWhen an OTR ends One-Touch RecordingStopping an OTR Point the remote control at DVD/VCR 2. Press Rerecording Tape DuplicationMake the connections shown above Turn on the TV and set it to channel 03 or 04Timer Recording Instructions continue onTimer Recording cont’d Cancelling Timer RecordingsWhen a timer recording ends Will flash. Insert a tapeDVD to Videotape Duplication Speed are onRepeat Playback Time Search, Index Search Time SearchIndex Search A recording by following these stepsAutomatic Operation Features Special Effects PlaybackMulti-Channel Television Sound / Hi-Fi Stereo Understanding DisplaysMulti-Channel Television Sound Hi-Fi StereoUsing the Title Menu Menus, Playback Control PBC FunctionPlayback Control PBC Function Press K, L, s, or B to select an item, then pressRemote control Fast Forward/Reverse SearchDuring playback, press Search g or h on Press Play B to return to normal playbackTitle/Chapter Playback,Time Playback Title/Chapter PlaybackTime Playback Using Search Track PlaybackPlayback will start at the selected Track Within 30 seconds of the previous numberPaused and Step-by-Step Playback Resume OnDuring Disc Playback, press Pause k. Playback will Press Play B to resume playRepeat Playback, A-B Repeat Repeat PlaybackRepeat Let you start over OFF will appear briefly onMarkers Within 30 seconds, press s or B to select a MarkerTo return to a Marker during playback, press Subtitles, Camera Angles SubtitlesCamera Angles Audio Language, Stereo Sound Mode Stereo Sound ModeAudio Language During DVD playback, press Audio repeatedly toSlow Motion, Zoom Slow MotionZoom Press Pause F during DVD or Video CD playbackProgram/Random Playback Program PlaybackRandom Playback 46 MP3/Windows MediaTM Audio/JPEG Playback Dual Playback Folder PlaybackFile List will appear On-Screen Displays DVD DisplaysAudio CD and Video CD Displays Displays during DVD playbackOn-Screen Displays cont’d Press Display again to remove the displayBlack Level,Virtual Surround InitializingBlack Level Virtual SurroundInstructions continue on the next Language cont’d Language CodesPress K or L to select a language, then press Select a setting, then press OK DisplayPress s or B to select Custom at the top If you selected TV ASPECT, press K or L toYou may adjust the Progressive Scan compatibility Display cont’dProgressive Scan Instructions from previousPress DVD to put the DVD/VCR in DVD mode AudioDVD Player of the DVD/VCR While playback is stopped, pressParental Levels Press sor B to select Custom at the top Menu, then press OKPress sor B to select PARENTAL, at the topPress L to select Password CHANGE, then press While playback is stopped, press SYSTEM/MENUPress OK, and proceed to step Others Press s or B to select OTHERS, then Press OKOthers cont’d Press SYSTEM/MENU to remove the menusGlossary Cable Box/Satellite Receiver Output Channel 03 orHelpful Hints Helpful Hints cont’d Line Input mode Cleaning the Video HeadsYou cannot insert a video cassette You cannot remove the tapeCare and Maintenance SpecificationsLimited Warranty Proof of PurchaseInformation Index Controls Dvd/vcr Remote
Top Page Image Contents