Philips DVP3050V/37B user manual First-time DVD/VCR Setup

H9820UD_IB_EN_1_0210 2/14/05 11:16 AM Page 16

English

16First-time DVD/VCR Setup

Before turning on your DVD/VCR, make sure batteries are in the remote control and the DVD/VCR and TV are connected correctly. You cannot program channels if you are using a Cable Box or a Satellite Receiver.

These menus may not appear if you have already turned on the DVD/VCR.

1 Turn on the TV. Set it to channel 3 or 4 or its AUDIO/VIDEO IN channel, depending on how you connected the DVD/VCR to a TV.

Press VCR, then press STANDBY-ON y. VCR light will
appear on the front of the DVD/VCR.The display shown
2 below will appear.
These menus may not appear if you have already turned on
the DVD/VCR.You may have turned on the DVD/VCR
before to find the Audio/Video In channel of the TV, for
example. If so, follow the steps on page 21 to set up
channels and page 23 to select a language for the VCR
menus.
LANGUAGE SELECT
BENGLISH	[ON]
FRANCAIS
ESPAÑOL

PUSH B

3 Press K or L to select ENGLISH, FRANCAIS (French), or ESPAÑOL (Spanish) as the language for VCR on-screen displays and menus. Then, press B. The display shown below will appear.

AUTO SET UP

PUSH B

4 Press B to begin channel programming. AUTO SETUP will flash on the TV screen during the channel search.The DVD/VCR will memorize all available channels. When channel programming is complete, the lowest available channel will appear on the TV.

These channels will be available when you want to watch TV while in VCR mode.To put the DVD/VCR in VCR mode, press VCR so VCR light appears. Use SKIP ∑/CH K or SKIP w/CH L to select memorized channels.To select non-memorized channels, use the Number buttons.

1 Turn on the TV.

		STANDBY-ON		2
SEARCH	MODE	DISPLAY
REPEAT REPEAT		AUDIO
	A-B
SUBTITLE	ZOOM	ANGLE	SKIP / CH
RETURN	TITLE CLEAR/RESET SLOW
VCR	VCR/TV		DVD
DISC/VCR			SYSTEM	3-4
MENU			MENU
	OK
STOP	PLAY		PAUSE
TIMER SET	MARKER		RECORD

SPEED

1 2 3

4 5 6 7

8 9 0 +10

Helpful Hints

•To skip this feature and play a tape immediately, insert a tape with its record tab removed.

•If you like to skip step 4, press DISC/VCR MENU as soon as the search begins.The DVD/VCR will stop the channel search, and the VCR menus and displays will be in English.

•If you try to program channels when there is no antenna or Cable TV signal connected to the ANT-IN jack of the DVD/VCR, programming will stop.AUTO SET UP will stop flashing. Connect an antenna or Cable TV signal to the DVD/VCR’s ANT-IN jack and press B again.

•Repeat this process if the power fails.