Philips 55PL9523 When using Dual Screen, When using Large or Small PIP, When using PIP3 or PIP6

Changing Channels/Input Sources and Repositioning Dual Screen/PIP

G

When using Dual Screen:
A light-colored border indicates the selected
screen. If the screen whose channel or input
1 source you want to change is not selected,
press the Cursor Right or Left button to select
the desired screen.
To change channels in the selected screen, press
2 Or:the CH (Channel Selection) + or – buttons.	3
To change the input source, first press the
Source Select button. Then, within 6 seconds,
3 press the Cursor Up or Down until your
desired input source is highlighted. Press the
OK button to confirm. The desired input		3
source appears in the selected screen.	1
NOTE: If the list of input sources “times out”			1
(leaves the screen) before you can make your
selection, press the Source Select button again
to display the list again.			2			TV
						AV1:DVD
When using Large or Small PIP:				Source	OK	AV2:Recorder
	3 3					AV3:SAT
When the PIP window is on screen, press the						AV4:HD
						AV5:Other
Cursor Up or Down button to select either the
						AV6:HD
1 main or PIP screen. A light-colored border sur-						SIDE:Camera
rounds the PIP screen when it is selected. The
PIP screen must be selected before its channel
or input source can be changed.
To change channels in the PIP screen, press
2 Or:the CH (Channel Selection) + or – buttons.
To select a different input source, first press
the Source Select button. Then, within 6 sec-
3 onds, press the Cursor Up or Down until your
desired input source is highlighted. Press the
OK button to confirm. The desired input
source appears in the PIP screen.
NOTE: If the list of input sources “times out”	3	1
(leaves the screen) before you can make your						TV
selection, press the Source Select button again
to display the list again.		3				AV1:DVD
				Source	OK	AV2:Recorder
To reposition the PIP screen:						AV3:SAT
		4				AV4:HD
Press the Cursor Up or Down button. The ball						AV5:Other
						AV6:HD
and direction indicator appear on screen.		5				SIDE:Camera
4 Within 6 seconds, press the OK button. A mul-	5		5
tidirectional symbol appears on screen.
NOTE: If the ball and direction indicator
“time out” (leave the screen) before you press
the OK button, simply press the Cursor Up or	3	1
Down button again.
Press the Cursor Up, Down, Left, or Right but-
tons to move the PIP window to the desired	4	3	2
5 location.
Press the OK button. The ball and direction	6	4
indicator reappear and “time out” (leave the
6 screen) in about 6 seconds.		5

When using PIP3 or PIP6:

To change channels when in PIP3 or PIP6 modes, press the Cursor Right, Left, Up, or Down buttons to select the screen whose channel or source you want to change. Then follow step 2 or 3 in either section above to change channels or input sources.

ACITVE

SOUND CONTROL PICTURE

1 2

ZOOM

59