Philips 55PW9383, 60PW9383 manual Adjusting the Manual Converge Controls Converge RED/BLUE

Page 33

Using the On-screen Submenus: Picture

ADJUSTING THE MANUAL CONVERGE CONTROLS: CONVERGE RED/BLUE

As explained in the Quick Use and Setup Guide, your projection TV has three color

projection tubes: one for red, one for green, and one for blue. When mixed in proper proportion, the beams of light coming from the tubes can produce any color. To create a clear picture, however, these color beams must be precisely aligned. This alignment is called convergence. Bumps and vibrations, moving the set, or the presence of magnetic fields can cause the color beams to become improperly aligned, or mis- converged, resulting in a fuzzy picture. Using the Auto IntelliSense™ feature, you can auto- matically adjust convergence in 20 seconds or less. See page 7 in the Quick Use and Setup Guide. Also, if you desire, you can use the MANUAL CONVERGE controls—explained on this page and the next—to make additional con- vergence adjustments to suit your personal pref- erences or to further fine-tune the picture. See the chart to the right to determine which MANUAL CONVERGE controls to use for cur- rent picture conditions.

NOTE: Allow the TV to warm up for 20 minutes before adjusting convergence.

1 Press the MENU/SELECT button to show the on-screen menu. Press the CURSOR RING RIGHT to enter the PICTURE submenu. Then press the CURSOR RING DOWN repeatedly until MANUAL CONVERGE is highlighted.

2 Press the CURSOR RING RIGHT to enter the MANUAL CONVERGE submenu. If you want to adjust the Red Convergence, press the CURSOR RING RIGHT to enter the adjust mode. To adjust the Blue Convergence, press the CURSOR RING DOWN to highlight CONVERGE BLUE, then press the CURSOR RING RIGHT to enter adjust mode.

3 In adjust mode, press the CURSOR RING RIGHT, LEFT, UP, or DOWN to adjust the cross hair until the color outline around it is gone. (The adjust- ment is automatically saved in the TV’s memory.) To return to the MANUAL CONVERGE menu, press the MENU/SELECT button. To exit the on- screen display, press the STATUS/EXIT button.

PICTURE

MANUAL CONVERGE

CONVERGE RED

CONVERGE BLUE

MULTIPOINT RED

MULTIPOINT BLUE

SAVE MULTIPOINT

POWER

TV

VCR

ACC

 

SOUND

 

ACTIVE

2,3

SWAP

PIP CH

CONTROL FREEZE

 

DN

UP

 

 

STATUS/

 

MENU/

 

EXIT

 

SELECT

 

MUTE

 

1

VOL

 

CH

1 2 3

4 5 6

7 8 9

TV/VCR

A/CH

0

SURF

POSITION

 

PIP

Converge Red

Converge Red

Determining Which

Manual Converge

Control to Use

Screen

 

appearance

Action

 

 

 

Adjust the

 

CONVERGE

Various

RED control.

images

Then if any red

throughout

outlines remain,

the entire

adjust the

picture have

MULTIPOINT

red outlines.

RED control.

 

Adjust the

 

CONVERGE

Various

BLUE control.

images

Then if any blue

throughout

outlines remain,

the entire

adjust the

picture have

MULTIPOINT

blue outlines.

BLUE control.

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Hdtv Monitor Warranty Verification Important Safety Instructions Contents End-of-life Disposal FeaturesWhat You Can Connect to Standard Panel Jacks Panel Overview Standard Inputs and OutputsWhat You Can Connect to High-definition Input Jacks Panel Overview HIGH-DEFINITION InputsRear of TV Connecting a VCRConnecting a VCR and Cable BOX Connecting Using AN Audio HI-FI System with Your TVSee the section below on using the Audio OUT control Making Optional SURROUND-SOUND Connections Four paired wires for speaker connectionsRear of DVD Player Connecting a Standard DVD PlayerRear of Device with Video Output Connecting AN S-VIDEO DeviceAV4 Connecting a DVD Player with PROGRESSIVE-SCAN CapabilityConnecting AN HD Receiver to the HD INPUT-AV 4 Jacks Connect S-VIDEO and audio cables. Note This example usesConnect coaxial cables VOL Connecting a CamcorderTV’s side panel has a headphone jack for personal listening Connecting and Using Headphones with Your TVVCR Programming the TV Remote to Work with Accessory DevicesPlease read through all the steps before beginning Using the CODE-ENTRY Method to Program Your TV RemoteUsing the Search Method to Program Your TV Remote VCR DIRECT-ENTRY Codes for A/V Accessory DevicesTelevision CH & TV/VCR Using the TV Remote with Accessory DevicesSource you want to watch Using the AV and Source Select ButtonsAutoSound Options Using AutosoundColor Picture Using AutopictureSurf List Empty Using AutosurfProgram List CVI Using Program List and Alternate ChannelSleep Timer Control UsingPicture-adjustment Options Adjusting the Picture ControlsPress the STATUS/EXIT button to turn the menu off Setting the EYE Fidelity ControlMIN Setting the Dynamic Contrast ControlConverge RED Adjusting the Manual Converge Controls Converge RED/BLUESwap Adjusting the Manual Converge Controls Multipoint RED/BLUEBalance Adjusting the TREBLE, BASS, and Balance ControlsUsing the AVL Audio Volume Leveler Control Selecting the SURROUND-SOUND Modes Selecting a Surround-sound Option Using Remote ControlSelecting the STEREO/MONO Sound Mode Selecting the SAP Second Audio Program Feature Selecting SAP Using Remote ControlSelecting SAP Using TV Buttons Speakers Using the Bass Boost ControlFeatures Setting the ClockChannel Displaying the TimeTime Setting the TIMER’S Start Time and Stop TimePress the Cursor Ring Right to enter the Features submenu Selecting the TIMER’S ChannelSetting the TIMER’S Activate Control Understanding Autolock Features Setting UP the Autolock Access CodeInstall Using Autolock to Block ChannelsFormat Using Autolock to Block by Movie RatingUsing Autolock to Block by TV Rating Turning the Autolock Blocking Control on or OFF Using Autolock to Block Unrated Broadcasts RIGHT. Then press the CUR Using Autolock to Block Broadcasts That have no RatingSOR Ring Down once To highlight the AutoLock ControlPress the STATUS/EXIT button on Reviewing Your Current Autolock SettingsMute Using the Closed Captioning ControlSelecting a Picture Format Using the Remote Control Using the PICTURE-FORMAT ControlSelecting a picture Format Using the TV Buttons Turning Active Control on or Off Using the TV Buttons Using Active ControlWhen the Inputs Are Used with RGB Video Signals Model SpecificationsSpace for HD INPUT-AV Setting ColorVideo-game images and scoreboards Care and CleaningTV has no power TroubleshootingYou are not able to get sound Glossary of Television Terms Index Canada Factory Service LocationsAtlanta Cleveland Chicago This page is intentionally left blank This page is intentionally left blank Page Projection Television Limited Warranty
Top Page Image Contents