Positioning the TV, Contents | Philips 55PP9753/17 instruction

Quicki Use and Setup Guidei

HDTV Monitori with Pixel Plus™

Contents
Warning	. .1
Positioning the TV	. .1
Making Basic Connections to the TV	1–2
IMPORTANT! Initial TV Setup	. .3
Using the TV Buttons	. .3
Using the Remote Control	3–4
Using the On-screen Menu	. .5
Using the Demo Mode	. .6
Using the Installation Features	6-7
Using Auto IntelliSense™ to Adjust Picture Convergence	.8
NOTE: Your Philips projection television has three color picture
tubes that are aligned at the factory to make the light beams come
together, or converge, on the screen properly. Transporting or
moving the TV can cause the tubes to be misaligned. Color
fringes or haloes around images in the picture are the result. With
Auto IntelliSense™, automatically adjust picture convergence at
the push of a button. Auto IntelliSense™ Focus responds to the
natural and man-made magnetic field conditions where the projec-
tion TV is located, so you can easily enjoy a well-converged pic-
ture.See page 8 for details. NOTE: You should allow the TV to
warm up for at least 20 minutes before making this adjustment.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR EXCESSIVE MOISTURE.

As an Energy Star® Partner, Philips Consumer Electronics has deter-

mined this product meets the Energy Star® guidelines for energy

efficiency. Energy Star® is a U.S. registered mark. Using products

with the Energy Star® label can save energy. Saving energy reduces air pollution

and lowers utility bills.

Positioning the TV

Before connecting accessory devices—VCR, DVD player, or HD receiver, for example—please keep the following in mind:

•Allow 4 to 6 inches of space behind the TV for ventilation.

•Test various locations in the room to find the optimal spot to locate the set for best viewing.

•Do not place the TV in direct sunlight or near a heating appliance.

•Do not expose the TV to rain or moisture.

•To prevent any unsafe situations, do not place objects on top of the TV.

For safety, do not set objects on top of the TV.

Situate the TV where it will not be exposed to heat or moisture.

Allow 4 to 6 inches behind the TV for ventilation.

Making Basic Connections to the TV

NOTE: See the Directions for Use manual for more detailed information and more connection examples.

Cable TV

Connect the cable TV signal to the ANTENNA IN 75Ω jack on the back of the TV. See page 7 for details on using Autoprogram to store channels in the TV’s memory.

NOTE: This connection will supply stereo sound to the TV if it is being broadcast by the station you are watching.

7/09/03

Incoming

Cable TV

Signal

				Back of TV
ANTENNA IN 75Ω	AMP SWITCH
	EXT	INT
	+	_
				HD INPUT-AV 4
	CENTER CHANNEL AMP INPUT			DVI
				HD INPUT-AV 3
				G/Y
				R/Pr
INPUT-AV 1		OUTPUT	INPUT-AV 2	SUBWOOFER
	Y			B/Pb
VIDEO			VIDEO
S-VIDEO			S-VIDEO
L	Pb		L	V
				V
L			L	L	L
				SYNC
AUDIO	Pr		AUDIO	AUDIO	AUDIO
				H
R			R	R	R

3135 035 21411