Press the Cursor Down button repeatedly until

USING AUTO INTELLISENSE™ TO ADJUST PICTURE CONVERGENCE

Your Philips television has three color picture tubes that are
aligned at the factory to properly bring the projected light beams
together on screen. Transporting or moving the TV, however, can
cause misalignment, which results in the appearance of color
fringes or haloes around images on screen. You can easily correct
this using the Auto IntelliSense™ feature. Allow the TV to warm
up for 20 minutes, then press the IntelliSense button on the front
of the TV. Within a few moments, picture convergence will be
adjusted.	INTELLISENSE FOCUS IN PROGRESS

You can also set Auto IntelliSense™ in motion through the on-screen menu:

1	Press the MENU button on the remote control to show
1	the on-screen menu.
2	Press the Cursor Down button to select “Settings.”
2	Press the Cursor Right button to select “General.”
3	Press the Cursor Down button repeatedly until
4	“IntelliSense” is selected.
5	Press the OK button to activate Auto IntelliSense™. In a
5	few moments the picture will be converged.

Settings

Demo

Install

Picture Sound Features Channels

General Clock

Settings

Demo

Install

Settings

IntelliSense

Manual Convergence

HELPFUL HINT

If you would like, you can make additional convergence adjust- ments to suit your personal preferences or to further fine-tune the picture. To do this, use the Manual Convergence controls in the Settings, General menu. See the Directions for Use manual for details.

5 3