CONTROLS AND CONNECTIONS
Front View
Menu button
Press to access or exit the menu.
Back button
Press to return to the previous menu screen.
Arrow buttons ( ▼ ▲) Press to select items in the menu or Program Guide.
Smart Help
These functions are also available on the remote
control and are described in that section (page 14).The Standby/ IR indicator lights when your sys- tem is active.The light is off when the unit is in Standby mode.
Power button
Press to turn the Satellite Receiver on or press to place the Satellite Receiver in Standby Mode.
OK button
Press to confirm a selection in the menu or Program Guide.
Power indicator
Lights when the Satellite Receiver is on.
Card Access
Install Access Card here. Details are on page 12.
VCR controller output (DSX3575 only)
Phone jack
Connect the phone cord here and to the wall phone jack in your home.
Rear View
Sat In
Connect the coaxial cable from the Satellite Dish antenna here. Details are in the Satellite Dish Antenna Assembly & Alignment guide.
RF In
Left/right Audio output
Connect red and white
Video output
Connect yellow
Secondary Audio/Video Outputs (DSX5353 and DSX5375 only)
To TV/VCR
Channel 3/4 switch Set to channel 3 or 4. Details are on page 10.
Connect an
Now, go to Connecting To Your Existing Equipment on page 10.
9