Listen to FM radio, Tune to FM radio stations

Press RDS/INFO repeatedly to scroll through the following information (if available):

»» Station name

Tune to an RDS station.

RDS (Radio Data System) is a service that allows FM stations to show additional information. If you tune to an RDS station, an RDS icon and the station name are displayed.

4 Repeat steps 2-3 to program other stations.

Note

•• To overwrite a programmed station, store another station in its place.

Tune to a preset radio station

1 Press FM.

2 Press / to select a preset number.

Show RDS information

6Listen to FM radio

Tune to FM radio stations

Note

•• Ensure that you have connected and fully extended the supplied FM antenna.

1 Press FM.

2 Press and hold / to tune to a radio station.

3 When the frequency starts to change, release the button.

»» The FM tuner tunes to a station with strong reception automatically.

4 Repeat steps 2-3 to tune to more stations.

To tune to a weak station:

Press / repeatedly until you find optimal reception.

Program radio stations automatically

Note

•• You can program a maximum of 20 preset radio stations.

1 In FM tuner mode, press PROG/CLOCK SET for 3 seconds to activate automatic programming.

»» [AUTO] (auto) is displayed.

»» The unit stores all the FM radio stations automatically and then broadcasts the first preset radio station.

Program radio stations manually

Note

•• You can program a maximum of 20 preset radio stations.

1 Tune to a radio station.

2 Press PROG/CLOCK SET to activate programming mode.

3 Press / to select a number from 1–20 for this radio station, then press PROG/CLOCK SET to program the current radio station.

»» The preset number and the frequency

of the preset station are displayed.

E n g l i s h