8 Other features
Set alarm timer
This unit can be used as an alarm clock.You can select DISC,TUNER or USB as alarm source.
Note
•• Make sure that you have set the time correctly.
1 In standby mode, press and hold SLEEP/TIMER for three seconds
»» [TIMER SET](timer set) scrolls on the display.
»» [SELECT SOURCE] (select source) scrolls on the screen.
2 Press SOURCE repeatedly to select a source: DISC, USB, TUNER.
3 Press SLEEP/TIMER to confirm.
»» The hour digits are displayed and begin to blink.
Set sleep timer
1 When the unit is turned on, press SLEEP/TIMER repeatedly to select a time period (in minutes).
»» When sleep timer is activated, 
is displayed.
»» To deactivate sleep timer, press SLEEP/TIMER again until 
disappears.
Listen through headphone
Plug a headphone into the 
socket.
Listen to external audio device
You can listen to an external audio device such as MP3 player through this unit.
1
4 Press 
/ 
repeatedly to set hour, then press SLEEP/TIMER again to confirm. »» The minute digits are displayed and
begin to blink.
5 Press 
/ 
to set minute, then press SLEEP/TIMER to confirm.
»» VOL (volume) is displayed and begins to blink.
6 Press 
/ 
to adjust volume, then press SLEEP/TIMER to confirm.
»» 
is displayed.
»» To deactivate alarm timer, press SLEEP/TIMER again.
Note
•• Alarm timer is not available in MP3 LINK mode.
•• If DISC/USB source is selected and the track cannot be played, tuner is activated automatically.
2
3
• the MP3 LINK socket
• the audio output jack (usually headphone jack) of the external device.
22EN