Philips MCD2010 user manual Video Setup, Audio Setup, Preference setup

Page 20

[Sleep Timer]:Sets a sleep timer to switch the home theater to standby after a specific time.

[DivX(R) VOD Code]: Get registration code of DivX Video On Demand Registration.

Note

•• If you select a language which is not available on a disc, this unit uses the default language of the disc.

Video Setup

1 Press button.

2 Select to access the setup menu.

3 Select to access the [Video Setup] options.

[TV System]:Selects a TV system that is compatible with the TV.

[Aspect Ratio]: Set screen display format(Pan Scan, Letter Box or Wide Screen).

[Progressive]:Enables or disables progressive scan mode.

[Picture Settings]: Select a predefined color setting or set the color manually.

Audio Setup

1 Press button.

2 Select to access the setup menu.

3 Select to access the [Audio Setup] options.

[Analogue Output]:Selects the analog audio setting based on the audio device that is connected through the analog audio jacks.

[Digital Audio]:Select audio formats supported by the connected device.

 

 

• [Sound Mode]: Selects a preset

 

 

 

 

 

 

sound effect to enhance the audio

i s h

 

 

output.

 

 

• [Night Mode]: Select quiet or

E n g l

 

 

full dynamic sound. Night mode

 

 

 

decreases the volume of loud sound

 

 

 

 

 

 

and increases the volume of soft

 

 

 

sound (such as speech).

 

 

 

 

Preference setup

 

 

1

Press

button.

 

2

Select

to access the setup menu.

 

3

Select

to access the [Preference Setup]

 

options.

[Audio]: Select an audio language for video.

[Subtitle]: Select a subtitle language for video.

[Disc Menu]: Select a menu language for a video disc.

[Parental Control]: Set the rating level to a disc. Restrict access to discs that are encoded with ratings These discs must be recorded with rating levels.

[PBC]:Display or skip the content menu for VCD and SVCD.

[Password]: Set or change a password to play a restricted disc.

[DivX Subtitle]:Select the language of the DivX.

[Version Info.]:Display the software version for the .

[Default]:Reset the home theater to the default settings programmed at the factory.

Note

•• Ensure that the subtitle file has the exact same file name as the movie file. If for example the file name of the movie is ‘Movie.avi’, then you need to name the text file ‘Movie.sub’ or ‘Movie.srt’.

EN 21

Image 20
Contents Register your product and get support at Contents Know these safety symbols Important Safety InstructionsHearing safety Listen at a moderate volumeBe careful not to adjust the volume as your hearing adapts Is attached to a product it means that2002/96/EC ProductsNorge Copyright noticeTrademark notice Feature introduction CongratulationsWhat’s in the box Serial NoOverview of the main unit Overview of the main unitBack view Overview of remote control Before use Place the unitDSC/DBB MODE/OPTIONSConnect power ConnectConnect speakers Connect TVConnect FM aerial Install/replace the battery of remote controlYou can route audio from an external device to this product Demonstrate the unit’s features Get startedTurn on Find the correct video input channelPlay disc/USB Select the correct TV systemSelect a language for on- screen display Basic operationPlay recored files Control the playPicture view options Adjust sound Play slideshow and music simultaneouslyRotate picture To stop the slideshow, pressProgram radio stations manually Listen to FM radioTune to FM radio stations Setup General setupSelect to access the system menu Synchronize clock with RDS stationPreference setup Video SetupAudio Setup Other features Set alarm timerSet sleep timer Listen through headphoneRegion Code SpecificationsProduct information USB playability information Supported disc formatsSupported audio Troubleshooting Poor radio reception