Philips VR 708A/07 operating instructions Recording automatically from a satellite receiver

MAIN MENU
ÂÅ PLAY FUNCTIONS		Å
É	RECORDING FUNCTIONS
	SPECIAL SETTINGS
	INSTALLATION
		TO EXIT
		PRESS MENU
MAIN MENU
	RECORDING FUNCTIONS
ÂÅ RECORD SETTINGS		Å
É	AUDIO ONLY
	AUDIO DUBBING
		TO EXIT
		PRESS MENU
RECORDING FUNCTIONS
	RECORD SETTINGS
 RECORDING SPEED		Ä SP Å
É	DIRECT RECORD	ON
	SAT RECORDING	OFF

TO EXIT

PRESS MENU

Recording automatically from a satellite receiver

You can only use this function if you have a satellite receiver which can control other devices via a scart cable

What is a scart cable?
The scart or Euro-AV cable serves as the universal
recording and playback connector for picture-, sound-
and control signals.With this type of connection, there
is practically no loss of quality during the signal
transfer. We recommend that you use a scart cable	PARDON?
when using this video recorder.

1Insert a cassette without erase protection

2Make sure that the satellite receiver is connected to the scart socket AV 1 EXT.1 or AV 2 EXT.2 at the back of the video recorder

3Press the MENU button on the remote control.The on-screen menu appears

4Use =P- or ;P+ to select the option “RECORDING FUNCTIONS” and confirm with P

5Use =P- or ;P+ to select the option “RECORD SETTINGS” and confirm with P

6 Use =P- or ;P+ to select the option “SAT RECORDING” and use P or Q to select the scart socket (“E1” or “E2”), to which the satellite receiver has been connected (see step 2). Confirm with OK. The screen will show (“STORED”)

7Leave the on-screen menu with MENU

8Programme the data on the satellite receiver for the desired recording. If necessary, you should refer to the instructions for your satellite receiver for assistance.

9SWITCH OFF THE VIDEO RECORDER WITH THE

STANDBY/ON BUTTON m. IF YOU DON’T DO

THIS, THE SET WILL NOT RECORD. When

automatic recording has been activated by a satellite receiver,“x” will light up in the display

RECORDING AUTOMATICALLY FROM A SATELLITE RECEIVER 32 ENGLISH