Activate VPS/PDC |
|
VPS (Video Programming Service) and PDC signals |
|
(Programme Delivery Control) are transmitted by TV |
|
channels at the start and end of transmissions and |
|
ensure that programmes will be completely recorded, |
|
even if they are rescheduled. In the entry field, | FOR |
“START” use SELECT to switch recognition of these | |
signals on (*) or off ( ). | EXPERTS |
7Use P or Q to select the entry field “END.” and use =P- or ;P+ or the number buttons
Selecting the recording speed |
|
You have the option of two playback and recording speeds: |
|
Standard Play (SP) offers the usual |
|
and with Long Play (LP) you can for example (with |
|
somewhat reduced picture quality) record about 360 minutes |
|
on a |
|
recorder recognises how much remaining playing time is | FOR |
available and automatically selects SP or LP. In the entry field | |
“END” use SELECT to enter the required setting. | EXPERTS |
8Check that the date, programme number, start and finish time are shown correctly on the screen. Confirm with OK. The screen will show “STORED”
9Insert a cassette without erase protection
What is erase protection? |
|
VHS cassettes can be protected from |
|
breaking off a thin strip of plastic (arrow). This erase |
|
protection can be overridden by sticking one or more |
|
strips of adhesive tape tightly over the gap which has | PARDON? |
been created. |
0SWITCH OFF THE VIDEO RECORDER WITH THE STANDBY/ON BUTTON m ! IF YOU DON’T DO THIS, THE SET WILL NOT RECORD.
The display will show “k”
YOU WILL FIND TIPS FOR SOLVING
PROBLEMS TO DO WITH TIMER
RECORDING ON THE FOLLOWING PAGE. PROBLEM
ENGLISH | 37 | PROGRAMMING TIMER WITHOUT VIDEO PLUS |
|