2Connecting the video recorder
Aerial cable
Mains cable
Scart cable
Preparing the remote control for operation
1Take the remote control of the video recorder and the enclosed batteries (2 batteries)
2Open the battery compartment, insert the batteries as shown and then close the battery compartment.The remote control is now ready to use
Connecting to a TV set with a scart socket
1Have the following cables ready: An aerial cable (enclosed), a mains cable (enclosed) and a scart cable (enclosed)
What is a scart cable? |
|
The scart or |
|
recording and playback connector for |
|
and control signals.With this type of connection, there |
|
is practically no loss of quality during the signal |
|
transfer. We recommend that you use a scart cable | PARDON? |
when using this video recorder. |
2Switch off your TV set
3Remove the aerial cable plug from the back of
your TV set and insert it into the aerial socket 2 on the back of the video recorder
4Take the enclosed aerial cable and connect
the appropriate end to the aerial socket of your TV set and to the TV socket 3 on the back of the video recorder
ENGLISH | 7 | REMOTE CONTROL / CONNECTION WITH A SCART SOCKET |
|