Switching off Record Link | Philips VR750/58, VR752/58 manual

STOP C-L

FWD 1- B .

Automatic controlled recording from a satellite receiver (RECORD LINK)

This function automatically starts recording on the switched-off video recorder when a video signal is recognised through the connected scart cable. If your satellite receiver has a program- ming function, the recording will start automati- cally (as long as the satellite receiver is switched on).

1.Use a scart cable to connect scart socket AV2 (DECODER) on the video recorder to the corresponding scart socket on the satel- lite receiver.

2.Switch on the TV. If required, select the pro- gramme number for the video recorder.

3.Press MENU . The main menu will appear.

4.Select 'RECORD SET UP' with PLAY B-Kor

and confirm with

5.Select 'RECORD LINK' with PLAY B-Kor

STOP C-L .


	SELECT K L CHOOSE B
	RECORD SPEED	[SP]
	DIRECT RECORD	[OFF]
	→RECORD LINK	[OFF]
	END=EXIT


6.Select function 'ON' with			.
6.Select function 'ON' with		FWD 1- B	.

Switching off 'RECORD LINK'

To switch off the function, select 'OFF' with

FWD 1- B .

7.To end, press STATUS/EXIT .

8.Insert a cassette.

9.Programme the satellite receiver with the required information (programme number of the TV channel, start time, end time).

If necessary, please see the operating instructions for your satellite receiver.

10.Switch off the video recorder with STANDBY/ON y .

The video recorder is now ready to record. The beginning and end of the recording is controlled via scart socket AV2 (DECODER).

'DIRECT RECORD'

With DIRECT RECORD, you can record the right TV channel in seconds even if your video recorder is switched off. If the recording is start- ed manually, the video recorder uses the current TV channel set on the TV. You will find more information on how to switch 'DIRECT RECORD' on or off in the next section. Make sure that your video recorder socket (AV1/TV) and the TV are connected by a scart cable.

1.On the TV, select the programme number you want to make the recording from.

2.Press REC I with the video recorder

switched off.

3.Stop recording with STOP C-L .

How does DIRECT RECORD work?

The video recorder compares the TV channel selected on the TV with its stored TV channels via the scart cable. If the same TV channel is found, it switches the video recorder to the corresponding programme number and starts recording. Please do not change the TV channel on the TV during the search so as not to affect the process.

15	EN