Follow TV Automatic TV channels sorting

FWD 1- B

PLAY B-K

Follow TV (Automatic TV channels sorting)

When the automatic channel search function is activated, the TV channels are saved in a specific order. This may vary from the order of TV chan- nels on the TV.

This function changes the order of TV channels saved in the video recorder to match that of the TV.

Make sure that the video recorder and the TV are connected by a scart cable.

1.Switch on the TV. If required, select the pro- gramme number for the video recorder.

2.Press MENU . The main menu will appear.

3.Select 'TUNER SET UP' with PLAY B-Kor STOP C-Land confirm with FWD 1- B .

4.Select 'FOLLOW TV' with PLAY B-Kor STOP C-Land confirm with FWD 1- B .

SELECT K L CHOOSE B

AUTO TUNING MANUAL TUNING

→FOLLOW TV MOVE

END=EXIT

5.'P:01' will appear and '01' will flash in the video recorder display.

6.Select programme number '1' on the TV.

I cannot switch my TV to programme number '1'

If you have connected additional devices to socket AV2(DECODER), please disconnect these devices. Because of other connected devices, the TV could switch to the pro- gramme number of the scart socket.

7.Confirm with on the video recorder remote control. The video recorder compares the TV channels on the TV and the video recorder.

If the video recorder finds the same TV chan- nel as on the TV, then it stores it at 'P01'.

'NO TV SIGNALS' appears in the TV screen.

The video recorder is not receiving a video sig- nal from the TV.

Check the plug on the scart cable.

Check your TV’s operating instructions to see which scart socket is used for video signals.

If this does not help, it’s not possible to use this function. Please read the section 'Sorting TV channels manually'.

8.Wait until the next number, e.g. 'P:02' appears in the display.

9.Select the next programme number on the

TV, e.g. '2'.
Confirm with	FWD 1- B	.
10.		.

11.Repeat steps 8 to 10 until you have assigned a programme number to all TV channels.

12.To end, press STATUS/EXIT .

Automatic Tuning

During installation, all available TV channels are searched for and saved. If the channel assign- ments of your cable or satellite TV provider change or if you are re-installing the video recorder, e.g. after moving house, you can start this procedure again. This will replace all the TV channels already saved with the new ones.

1.Switch on the TV. If required, select the pro- gramme number for the video recorder.

2.Press MENU . The main menu will appear.

3.Select 'TUNER SET UP' with or STOP C-Land confirm with FWD 1- B .

4.Select 'AUTO TUNING' with or STOP C-Land confirm with FWD 1- B .

PLEASE WAIT

STARTFINISH

❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚

9	EN