Problems and solutions for programmed recordings

0..9

FWD 1- B

Problems and solutions for programmed recordings

Error message: ' ' flashes in the video recorder display

• No cassette was inserted. Insert a cassette and switch off the video recorder using

STANDBY/ON y .

Cassette was ejected as soon as the

STANDBY/ON y button was pressed

•A cassette without the security tab was insert- ed. Undo the erase protection (chapter 'Manual recording', section 'Preventing acci- dental erasing') or insert a different cassette.

'TURN OFF VCR FOR TIMER RECORDING' flashes on the TV screen

•The video recorder is switched on several min- utes before the start of a programmed record- ing. Switch off the video recorder with

STANDBY/ON y . A programmed recording (timer) will only function when the video recorder is switched off.

Cassette is ejected during recording

•The end of the tape was reached during recording.

The video recorder does not react

•While a programmed recording is being made, you cannot operate your video recorder manu- ally. If you want to cancel the programmed recording, press STOP/EJECT on the front panel.

How to check, or delete a programmed recording (TIMER)

1.Switch on the TV. If required, select the pro- gramme number for the video recorder.

2.Press MENU . The main menu will appear.

3.Select 'TIMER' with PLAY B-Kor STOP C-L . Then press FWD 1- B .

4.Select 'TIMER LIST' with PLAY B-Kor STOP C-L , and confirm with FWD 1- B .

SELECT K L CHOOSE B

ONCE

DAILY WEEKLY

→TIMER LIST

END=EXIT

5.Select timer block with FWD 1- B .

Timer block disappeared when I pressed

FWD 1- B .

You have checked all the programmed record- ings. If you want to check them again, repeat steps 2 to 5.

6.To cancel the recording, press CLEAR .

7.To end, press	STATUS/EXIT .
8.Switch off with	STANDBY/ON y .

How to change a programmed recording (TIMER)

1.Switch on the TV. If required, select the pro- gramme number for the video recorder.

2.Press MENU . The main menu will appear.

3.Select 'TIMER' with PLAY B-Kor STOP C-L .

Then press .

4.Select 'ONCE', 'DAILY' or 'WEEKLY' record- ing with PLAY B-Kor STOP C-L . Then press

5.Select a TIMER block with . (The flashing number indicates an empty TIMER block.)

ONCE

TIMER - 1 2 3 4 5 6 7 8 -

SELECT TIMER NUMBER

END=EXIT

6.Press	CLEAR	to delete information and input

correct information with				0..9		.
7.To end, press					.
			STATUS/EXIT
8.Switch off with							.
			STANDBY/ON y

20	EN