Important notes regarding operation

OPERATING INSTRUCTIONS

Thank you for buying a Philips video recorder. This video recorder is one of the most sophisti- cated and easy-to-use video recorders (VCR) on the market. Please take the time to read this operating manual before using your video recorder. It contains important information and notes regarding operation. The video recorder should not be turned on immediately after transportation from a cold to a hot area or vice versa, or in conditions of extreme humidity. Wait at least three hours after transporting the device. The video recorder needs this time in order to become acclimatised to its new environ- ment (temperature, air humidity, etc.).

PAL

This video recorder is used for the recording and playback of VHS videocassettes. Cassettes with the VHS-C label (VHS cassettes for camcorders) may only be used with a suitable adapter.

We hope you enjoy your new video recorder.

"Danger: High voltage!

Do not remove the top cover as there is a risk of an electric shock!

"To reduce the risk of fire or electric shock, do not expose this device to rain or mois- ture.

"The video recorder does not contain any com- ponents that can be repaired by the customer. Please leave all maintenance work for quali- fied personnel.

"As soon as the video recorder is connected to the power supply, there are some components that are in constant operation. To switch off the video recorder completely you must discon- nect it from the power supply.

!Make sure that air can circulate freely through the ventilation slots on the video recorder. Do not place the device on an unsteady base.

!Make sure that no objects or liquids enter the video recorder. Do not place vases or the like on the video recorder. If liquid is spilt into it, immediately disconnect the video recorder from the power supply and call After-sales Service for advice.

!Do not place any combustible objects on the device (candles, etc.).

!Make sure that children do not place any for- eign objects within the openings or ventilation slots.

These operating instructions have been printed on non-polluting paper.

Deposit old batteries at the appropriate col- lection points.

Please make use of the facilities available in your country for disposing of the packaging of the video recorder in a way that helps to protect the environment.

This electronic device contains many mate- rials that can be recycled. Please enquire about the possibilities for recycling your old device.

SHOWVIEW is a registered trademark of Gemstar Development Corporation. The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation.

So that you can identify your machine for service questions or in the event of theft, enter the serial number here. The serial number (PROD. NO.) is printed on the type plate fixed at the back of the device. Also, we suggest that you put a mark with your VCR MODEL NO..

MODEL NO. VR750/58

VR752/58

PROD. NO. ...........................

This product complies with the requirements of Directive 73/23/EEC +89/336/EEC +93/68 EEC.

Specifications

Voltage: 220-240V/50Hz

Power consumption : max. 25W

Power consumption (Standby): less than 3W

Rewind time: 68-78 seconds (cassette E-180)

Dimensions in cm (WxDxH): 43.5x22.6x9.2

Number of video heads : 4

Number of audio heads (Hi-Fi): 2

Recording/playback time:

3 hours (SP) (cassette E-180)

6 hours (LP) (cassette E-180)

Supplied accessories

•Operating instructions

•Remote control and 2 batteries

•Aerial cable

2	EN