30 One-Touch Recording
The
Before you begin, make sure:
●Channels are set up.
●There is a tape in the TV/VCR. The record tab must be intact.
1
Use the CHANNEL o/p buttons or the Number buttons to select the channel you want to record.
2
Press the SPEED button until the desired recording speed (SP, LP, or SLP) appears
3
Press the REC(ord)/OTR button repeatedly until the desired recording length appears in the upper right corner of the screen. Recording will begin immediately. The REC(ord) light will appear.
OTR | LENGTH 0:30 |
CH12 |
|
Press the STOP/EJECT but- | ||||||
ton on the TV/VCR to stop | ||||||
4 the OTR. |
|
|
|
| ||
| POWER |
|
| SLEEP |
|
|
|
| 2 | 3 | ALT.CH |
|
|
| 1 |
|
| 1 | ||
| 4 | 5 | 6 | o |
| |
|
|
|
| CHANNEL | ||
2 | 7 | 8 | 9 | p |
| |
| 0 | +100 | o |
|
| |
SPEED |
| MUTE | VOLUME |
|
| |
|
|
|
| |||
|
|
| p |
|
| |
|
| o |
|
|
| |
|
| PLAY |
|
|
| |
o | REW |
|
| F.FWD | o |
|
3 |
|
| STOP |
|
|
|
|
| p | p |
|
| |
| REC/OTR | MEMORY PAUSE/STILL |
|
| ||
|
|
|
| o |
|
|
| MENU STATUS/EXIT CLEAR | TRACKING |
| |||
|
|
|
|
LENGTH : PRESS OTR
CANCEL : PRESS CLEAR
4
To stop an OTR before recording is finished, press the STOP/EJECT button on the TV/VCR.
Or, press the REC(ord)/OTR button, then press the CLEAR button, then press the STOP/▼ button on the remote control.
Helpful Hints
•To check the time remaining for an OTR after the OTR has been set, press the STATUS/EXIT button.
•To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired recording length appears
•You can not pause an OTR.
•To cancel an OTR but continue recording, press the REC(ord)/OTR button, then press the CLEAR but- ton.
•You cannot record if DEFEAT RECORDING is set to ON. Details are on page 36.
•You can change the tape speed with the SPEED button while a recording is in progress, but some distortion may appear on the tape.