Philips CCC 133AT, CCC 193AT owner manual Helpful Hints

Page 54

54 Helpful Hints

If you are having problems with your product, check this list of problems and possible solutions before requesting service. You may be able to solve the problem yourself.

If you need to call a customer service representative, please know the model number and serial number of your product before you call. This information is on the back of the product. Also, please take a moment to identify the problem you are having, and be prepared to explain this to the representative. If the representa- tive will need to help you with operations, please stay near the product. Our representatives will be happy to assist you.

Location

For safe operation and satisfactory performance of your TV/VCR, remember the following:

Shield it from direct sunlight and keep it away from sources of intense heat.

Avoid dusty or humid places.

Avoid places with insufficient ventilation. Do not block the ventilation openings at the top and bottom of the TV/VCR. Do not place the TV/VCR on a carpet, as this will block the ventilation openings.

Avoid locations subject to strong vibrations.

Do not place the TV/VCR near strong magnetic fields.

Do not move the TV/VCR from a cold place to a hot place, or vice versa.

Electrical Shock and Fire Hazards

Do not handle the power cord with wet hands.

Do not pull the power cord when disconnecting the TV/VCR from the AC (alternating current) wall out- let. Grasp it by the plug.

If you spill water on the TV/VCR, unplug the power cord immediately and take the TV/VCR to an autho- rized service center.

Do not put your fingers or objects into the TV/VCR cassette compartment.

Do not place anything on top of the TV/VCR.

Dew Warning (Moisture Condensation)

Moisture may condense inside the unit when you move it from a cold place to a warm place, after heating a cold room, or when the humidity is high. There is no warning that moisture is in your TV/VCR. Playing a tape in a TV/VCR in which moisture has accumulated could damage the tape and the TV/VCR. If you sus- pect moisture inside the TV/VCR, keep the TV/VCR power on (but do not play a tape) for at least two hours. This will allow the TV/VCR to dry.

TV/VCR will not perform a timer recording.

Set the recording start and stop times correctly. Details are on pages 32-35.Midnight is 12 a.m. Noon is 12 p.m.

Make sure the TV/VCR power is off.

Set the clock. Details are on pages 12-17.

Put a tape in the TV/VCR. The tape must have a record tab.

With ShowGuard, you don’t have to worry about losing your timer recordings. If the power fails, timer recordings will be restored when the clock is reset. (The clock will reset itself automatically if you are using AUTO CLOCK. Details are on pages 14-17.If you are not using AUTO CLOCK, reset the clock manually. Details are on pages 12-13.) The timer recording will not occur only if it was scheduled to take place during the power failure.

Make sure DEFEAT RECORDING is OFF. Details are on page 36.

TV/VCR will not record.

Make sure the tape has a record tab. Details are on page five.

Make sure DEFEAT RECORDING is OFF. Details are on page 36.

Plug the power cord into an active AC outlet. Details are on page seven.

Check your hookups. Details are on pages six-seven.

Set up the channels. Details are on page 10.

Channel reception is poor.

Check connections, then set up the channels again. Details are on page 10.

The remote control is not available, or the remote control will not access the menu.

Use the buttons on the front of the TV/VCR to access the menu. You can not enter numbers (for exam- ple, to program a timer recording) using the front panel buttons. Details are on page 20.

Image 54
Contents Color TV with built-in VCR This bolt of lightning indi- cates uninsulated material Dear Philips product ownerFor Customer Use Model No Serial NoReal-Time Counter Frame Advance Remote Control FeaturesSafety Precautions IntroductionTable of Contents TV/VCR Maintenance Battery SafetyUsing the Remote Control Replace the battery compartment lidRF coaxial cable Not supplied Hook up your TV/VCR using one of the connections shownHooking Up the TV/VCR Rod AntennaCrooked Pin Straight Pin Hooking Up the TV/VCR cont’dBent pin Cable PlugYou cannot set up channels if you are using a Cable Box Turning On the TV/VCRPress the Menu button. The screen shown below will appear Language Selection Press the Menu buttonPress the STATUS/EXIT button Automatic Channel Setup Wait for the TV/VCR to set up channelsRepeat steps 3-4 to add or delete other channels Adding/Deleting ChannelsPress the PLAY/o button or the STOP/p button to select Programming of the channel you added or deleted will appearCable Box users must set the clock manually Setting the ClockManual Clock Setting Pages six-eightSetting the Clock cont’d Setting the Clock cont’d Automatic PBS Channel SelectionNOW Searching flashes on the TV/VCR screen Wait for the TV/VCR to find the timeManual PBS Channel Selection Use the Number buttons to select your PBS station PRIM. SETUP. Then, press the F.FWD/ B button Daylight-Savings TimePress the PLAY/ button or the STOP/ button to select Time Zone Front Panel ANTenna Jack AC Power CordRear Panel Connect your antenna or cable here. Details are on page sixRemote Control Buttons REWind/ Button Menu ButtonSTATUS/EXIT Button STOP/ ButtonAdjusting the Picture Controls Adjusting the Picture Controls cont’d Decrease IncreaseDecreased brightness If you select Status ON, then select Counter only on On-Screen Status DisplaysIf you select Status ON, then select Counter only OFF If you select Status OFFReminder ReminderPlaying Follow the steps below to play a tapeInsert a tape in the TV/VCR Recording To stop recording, press the STOP/ button Tape SpeedsOne-Touch Recording You cannot record if Defeat Recording is ON. Details are onTV/VCR is now in Line Input mode Rerecording Tape DuplicationTimer Recording DailyTimer Recording cont’d Timer Recording cont’d Program REVIEW, then press the F.FWD/B button Timer recording information for the program in the lowestWith the TV/VCR on, press the Menu button Gram Review and press the F.FWD/B buttonDefeat Recording Follow the steps below to prevent accidental recordingVCR SETUP, then press the F.FWD/B button Repeat PlayTV programming will appear while the tape is rewinding B Repeat Play Insert a tape in the TV/VCR Press the Menu buttonRepeat Play cont’d Real-Time Counter Memory Appear on the screenViewing a Still Picture Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Slow Motion PictureSmartLock To block ratings, follow the steps belowSmartlock menu will appear Ratings are defined on Ratings will remain blocked even after a power failureSmartLock cont’d Example Specific Sub-ratingsTo change the access code, follow these steps Use the Number buttons to enter your old access codeRating Explanations VCR Program VCR Setup Caption Reminder Blue BackgroundSLEEP. Then press the REWind/s button or Sleep TimerPress the SLEEP/WAKE UP button FWD/B button to select 30 MINutes, 60 MINutesWake Up Timer Timer Sleep Wake UP TV on ON-TIMEVolume Bar Cast with closed captions, you may choose to set the VolumeClosed Caption ExampleMenu Screen Closed Caption cont’d Standard Closed CaptionsHalf-screen text Switching the Antennas FM RadioAutomatic Operation Features Helpful Hints Helpful Hints cont’d Glossary Specifications Renewed Index Supplied Accessories