Philips SV2000 owner manual Auto Satellite Link Using a Satellite Tuner

If you connect your VCR to a satellite tuner that has the Electronic Program Guide, the VCR will turn itself on, record, then turn itself off. First, read the owner’s manual of your satellite tuner; then, follow these steps to set up your VCR. Before you begin:

●Use audio and video cables to connect the AUDIO/VIDEO IN jacks on the back of the VCR to the AUDIO/VIDEO OUT jacks on the satellite tuner.

●Press the SPEED button to select the desired tape speed (SP, LP, or SLP).

1

Set the program to be recorded on the satellite tuner. See your satellite tuner owner’s manual for details.

Set the program to

1 be recorded on the satellite tuner.

1 2 3

4 5 6

7 8 9 CHANNEL

SPEED 0 +100

QUICK- SEARCH

SLOW FIND TIME INDEX

2

Press the MENU button repeatedly until the VCR SET UP menu appears.

VCR SET UP

→SATELLITE LINK AUTO REPEAT RENTAL AUTO RETURN

2

3

3

Press the PLAY button or the STOP button repeatedly to select SATELLITE LINK.

4

Press the F.FWD button so that [ON] appears beside SATELLITE LINK. After one second, the VCR will turn itself off and the TIMER light will appear on the VCR display panel.

Helpful Hints

•To exit a stand-by mode of the Auto Satellite Link, press the POWER button to turn on the VCR. The VCR sets SATELLITE LINK to OFF automatically.

•To stop an Auto Satellite Link recording that is in progress, press the STOP/EJECT button on the VCR.

•If the preset time for an Auto Satellite Link comes up during a timer recording, the timer recording has priority.

•If a program has copy guard pro- tection, it may not record clearly.

•If noise appears on the TV screen when you view a program, connect the satellite tuner directly to the TV.

•When you use this feature, the first few seconds of a program may not be recorded.

•If your satellite tuner has the syn- chronized timer feature by the broadcasting time of a program, refer to the tuner’s owner’s manual.