Philips SV2000 owner manual Hookups With a Stereo TV

Page 10

SVZ142.comb 4/7/99 6:30 PM Page 10

10 Hookups With a Stereo TV

1	antenna or
	cable to
	ANT(enna)
	IN Jack

			ANT
			IN
AUDIO
OUT	IN		OUT
VIDEO		CH3	CH4
VIDEO


VIDEO (yellow) and	2
VIDEO (yellow) and
AUDIO (white) OUT Jacks								Video Cable

Audio and Video IN Jacks on TV

3 Audio Cable

●Audio and Video cables are not supplied.

1

Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR.

2

Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connect the other end of the video cable to the VIDEO IN Jack on your TV.

3

Connect an audio cable to the white AUDIO OUT Jack on the back of the VCR. Then, connect the other end of the audio cable to the AUDIO IN Jack on your TV.

(If your TV has Right and Left AUDIO IN Jacks, you must use a “Y” splitter audio cable as illustrated to deliver audio to the TV’s left and right channels.)

4

Turn on your TV, making sure it is in Line Input mode. Please refer to your TV owner’s manual for details.

Helpful Hint

• This hookup will not give you stereo sound. To get stereo sound, use the connections on pages six - seven and select the channel to be viewed at the TV (with the VCR turned off).

Image 10

Contents Video Cassette Recorder Warranty Verification For Customer UseSafety Precautions FeaturesIntroduction Table of Contents Using the Remote Control Before Using Your VCRPutting Batteries in the Remote Control VCR maintenanceHookups Without a Cable Box/Direct Broadcast System Disconnect the antenna or cable from your TVHookups Without a Cable Box/Direct Broadcast System cont’d Recording and Viewing a Scrambled or Unscrambled Channel Timer RecordingsHookups With a Cable Box Watching TV With the VCR OffRecording One Channel/Watching Another Hookups With a Cable Box cont’dPlaying a Tape Hookups With a Stereo TV Turning on Your VCR 2Turn on the TVAutomatic Channel Setup Adding/Deleting Channels Automatic Channel Setup cont’dSelect ADD/DELETE CH. Then, press the F.FWD button Setting the Clock Follow the steps below to set your VCR’s clock. Make sureSetting the Clock cont’d Press the Counter RESET/EXIT button to exit Language SelectionOn-Screen Status Displays OFF mode Press the Display button once Count modePress the Display button once Clock mode Press the DisplayRemote Control Buttons Time Search Button Counter RESET/EXIT ButtonEject Button Index Search ButtonVCR Display Panel Front Panel Video OUT Jack AC Power CordRear Panel Video in JackPlaying Read and follow the steps below to play a tapeRecording 1Turn on the TV Insert a tapeStarting an OTR One-Touch RecordingStopping an OTR Timer Recording Program Number Once Daily →WEEKLYTimer Recording cont’d Repeat the procedure in to set the recording’s end timeTimer recording. Details are on page eight Press the Counter RESET/EXIT buttonCancelling a Timer Recording Correcting a Timer RecordingAuto Return Auto Satellite Link Using a Satellite Tuner To return to the channel being recorded, use the TV Press the VCR/TV button on the VCR remote control toRecording One Channel/Watching Another Put the VCR in VCR position. The VCR/TV light will appearRerecording Tape Duplication JackRepeat Play Super High Speed Searching LP/SLP Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Viewing a Still PictureMenu will disappear, and Rental on or Rental Rental PlayTo on or OFF Real-Time Counter Memory Press the Play button to watch the tapeIndex Search Time Search Time Search is not available during recordingQuick Find To resume normal tape playback, press the Play buttonAutomatic Playback Features Helpful Hints Helpful Hints cont’d Glossary Cable Box/DBS Output Channel Channel 3 orSpecifications Limited Warranty Video Cassette RecorderIndex Supplied Accessories