Philips SV2000 owner manual Repeat Play

34 Repeat Play

Follow the steps below to program the VCR to play a tape over and over. Make sure:

●The VCR is on and is in VCR position. The VCR/TV light will appear on the front panel. If it does not, press the VCR/TV but- ton once.

●There is a tape in the VCR.

1

Press the MENU button repeatedly until the VCR SET UP menu appears.

VCR SET UP

→SATELLITE LINK AUTO REPEAT RENTAL AUTO RETURN

2

Press the PLAY button or the STOP button repeatedly to select AUTO REPEAT.

VCR SET UP

SATELLITE LINK

→AUTO REPEAT RENTAL AUTO RETURN

3

Press the F.FWD button so that [ON] appears next to AUTO REPEAT on-screen. Tape playback will begin immedi- ately. AUTO REPEAT B will appear on-screen briefly.

(If you are fast forwarding or rewinding the tape, you must first press the COUNTER RESET/EXIT button to exit, then press the PLAY button to begin tape playback.)

The VCR will play the tape to the end, rewind it, then play it again. (TV programming will appear on-screen while the tape is rewinding.)

1 2 3

4 5 6

7 8 9 CHANNEL

2

Helpful Hints

•To cancel AUTO REPEAT, follow steps 1 - 2 above. At step 3, press the F.FWD button so that [ON] no longer appears beside AUTO REPEAT. Press the COUNTER RESET/EXIT button to exit.

•The COUNTER MEMORY button does not function if AUTO REPEAT is set to [ON].

•The real-time counter memory is cancelled if AUTO REPEAT is set to [ON].