Before you call an engineer | Philips E4PIN, P406TAT, MA4CMH20MRE

8. Before you call an engineer

If, contrary to expectation, you have any prob- lems using this video recorder, it may be caused by the following reasons.

Your video recorder does not respond to any button being pressed:

*There is no power supply: check the power supply.

*A programmed recording is currently being made: if desired, cancel the programmed recording. Please see the section 'How to check or delete a programmed recording' in chapter 'Programming a recording'

*There is a technical problem: disconnect from the mains power supply for 60 seconds, then connect again.

If this doesn't help, you could reset your video recorder to the default factory settings.

Resetting devices to default factory settings

*Attention:

All the information stored (TV channels, time and date, TIMER) will be cleared.

1.Switch off this video recorder with

STANDBY/ON y .

2.Press and hold RECORD and PROGRAMME+ for 2 seconds or more at the same time.

Cassette is jammed in the video recorder:

*Don't use force. Pull out the mains plug for a moment.

Remote control does not work:

*Remote control not pointed toward the video recorder: point it at the video recorder.

*There is a technical problem: Take out the bat- teries, wait for 10 seconds and place them back.

*Batteries have run out: change the batteries.

No picture when you play a cassette:

*There is no recording on the cassette: change the cassette.

*You have selected the wrong programme num- ber on the TV for playing cassette: on the TV, select the correct programme number for the video recorder.

*The cable connecting the TV set and the video recorder has come loose: check the cable.

Poor picture quality when you play a cas- sette:

*Your TV set is not properly adjusted.

*The cassette is badly worn or of poor quality: use new cassette.

*Tracking is not properly adjusted: turn to sec- tion 'Manual Tracking'.

No recording possible:

*The TV channel you want to record is not stored or you selected the wrong programme number: check TV channels stored.

*A cassette was inserted that does not have the security tab (cannot be used to record): Insert a cassette with an intact security tab or change cassette. For more information, please see the section 'Preventing accidental erasing of cassettes' in chapter 'Manual Recording'.

*'VPS/PDC' switched on but 'VPS/PDC time' wrong: enter 'VPS/PDC time' exactly to the minute. Have your aerial checked.

There is picture or sound interference on TV

reception:

*Turn to chapter 'Installing your video recorder' and read 'Setting the RF out channel'.

*Have your aerial checked.

The wrong TV channel has been selected afteryou programmed a recording using VIDEO Plus+

*1. Enter the Plus Code of the desired TV chan- nel.

2.Check the programme number/channel name in the 'PROG.' input field

3.If this does not correspond to the desired TV channel, select the input field and change the programme number/channel name.

4.Confirm with STATUS/EXIT .

20	EN

MA4CMH20MRE, E4PIN, P406TAT specifications

The Philips P406TAT, E4PIN, and MA4CMH20MRE are remarkable products in the realm of innovative lighting solutions, showcasing Philips' commitment to blending technology and functionality for enhanced user experience. Each product possesses unique features tailored to meet specific lighting needs while ensuring energy efficiency and sustainability.

The Philips P406TAT stands out with its advanced LED technology. This model is designed for both commercial and residential applications, offering high lumen output with minimal energy consumption. The P406TAT features a built-in dimming capability, allowing users to adjust the brightness according to their preferences or the specific requirements of a space. Moreover, its sleek and modern design makes it a visually appealing addition to any environment, providing not only illumination but also an enhancement to the overall aesthetic. The robust construction ensures durability, making it suitable for varied settings, from offices to outdoor environments.

The E4PIN model focuses on versatility and efficiency. This innovative lighting solution is compact and lightweight, making it ideal for tight spaces where traditional lighting fixtures may not fit. The E4PIN employs Philips' proprietary SmartLight technology, which allows for customizable lighting scenarios, enhancing convenience for users. This model is particularly suited for retail and exhibition spaces, providing bright, consistent light that draws attention to products without causing glare. With its long lifespan and reduced environmental impact, the E4PIN is an excellent choice for businesses looking to reduce their carbon footprint while maintaining high-quality lighting.

Meanwhile, the MA4CMH20MRE exemplifies Philips' expertise in high-intensity discharge lighting. This model is engineered with a ceramic metal halide lamp, delivering premium color rendering and high luminous efficacy. The MA4CMH20MRE is primarily intended for outdoor lighting applications, such as street lighting and sports venues, providing powerful illumination that enhances safety and visibility. Featuring a quick warm-up time, this model reaches optimal brightness almost instantly, making it a reliable choice for various outdoor settings. The advanced thermal management system ensures sustained performance even during prolonged use, significantly reducing the need for maintenance.

In conclusion, the Philips P406TAT, E4PIN, and MA4CMH20MRE are exemplary representations of the brand's dedication to innovation in lighting technology. With an emphasis on efficiency, versatility, and durability, these products cater to diverse lighting needs while promoting a sustainable future.