Philips MA4CMH20MRE, P406TAT Connecting the video recorder, Important for the United Kingdom

Page 4

1. Connecting the video recorder

Important for the United Kingdom

This apparatus is fitted with an approved moulded 10 Amp plug. To change a fuse in this type of plug pro- ceed as follows:

1.Remove fuse cover and fuse.

2.Fix new fuse which should be a BS1362 3A,ASTA or BSI approved type.

3.Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place.

If the mains plug contains a fuse, this should have a value of 3A. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 3A.

The severed plug must be destroyed to avoid a possi- ble shock hazard should it be inserted into a 13A socket alsewhere.

How to connect a plug:

The wires in the mains lead are coloured in accor- dance with the following code:

BLUE- 'NEUTRAL' ('N')

BROWN- 'LIVE' ('L')

4.The BLUE wire must be connected to the terminal which is marked with the letter 'N' or coloured

BLACK.

5.The BROWN wire must be connected to the termi- nal which is marked with the letter 'L' or coloured RED.

6.Do not connect either wires to the earth terminai in the plug which is marked with the letter 'E' or by the safety earth symbol or coloured green or green-and-yellow.

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead-not imply over the two wires.

Preparing the remote control for operation

The remote control and its batteries are packed separately in the original video recorder packag- ing. You must install the batteries in the remote control before use.

1.Take the remote control and the enclosed batteries (2 batteries).

2.Open the remote control's battery compart- ment and place the batteries in it as shown in the picture and close the battery compart- ment.

The remote control is now ready to use. Its range is approximately 5 metres.

Connecting your video recorder to the TV set

The necessary cable connections must be

made before you can record or playback TV

programmes using your video recorder.

We recommend that you use a scart cable to connect your TV and video recorder.

What is a scart cable?

The scart or Euro AV cable serves as the uni- versal connector for picture, sound and control signals. With this type of connection, there is practically no loss of quality during the picture or sound transfer.

Connecting with a scart cable

Have the following cables ready:

 

 

an aerial cable (1, supplied), a

 

 

 

scart cable (2, not supplied).

 

 

 

1.Remove the aerial cable

 

1

2

plug from your TV set.

 

 

 

Insert it into the AERI-

TV

AERIAL

 

AL at the back of the

AERIAL

 

 

video recorder.

RF OUT

 

 

 

 

 

2.Insert one end of the

 

 

 

supplied aerial cable

 

 

 

into the RF OUT at

TV

 

 

the back of the video

 

RF OUT

 

recorder and the

AERIAL

 

 

RF OUT

 

 

 

 

 

other end into the

 

 

 

aerial input socket at

 

 

 

the back of the TV set.

 

 

 

3.Plug one end of a

 

 

 

scart cable into the

TV

 

 

scart socket AV1(TV)

AERIAL

 

 

at the back of the

RF OUT

TV

 

 

 

 

 

 

video recorder and

 

 

 

the other end into the suitable scart socket on

your TV reserved for the video recorder oper-

ation (see your TV's operating instructions).

 

4.Switch on the TV.

 

 

 

4

EN

 

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Table of Contents VR330/07 Specifications Important notes regarding operationWe hope you enjoy your new video recorder Model NO. VR330/07Connecting the video recorder Preparing the remote control for operationConnecting your video recorder to the TV set Connecting with a scart cableConnecting without a scart cable Important notes for operation Symbols on your video recorder displayNavigation in the screen menu Preparation for use Installing your video recorderManual TV channel search Sorting TV channels automatically Follow TV Clock resets automatically Automatic TuningSorting and clearing TV channels manually Setting the clock Setting the RF out channelTime/date is displayed incorrectly despite manual setting What is RF out channel?Playback Playing cassettesPlaying back Ntsc cassettes Displaying current tape positionSearching for a tape position with picture scanning Still pictureAutomatic search for a tape position index search Manual TrackingManual recording Switching Direct Record on or off Selecting the recording speed SP or LPDirect Record SP/LPProgramming a recording Timer Programming a recording with Video Plus+Problems and solutions for pro- grammed recordings Programming a recording without Video Plus+How to check, or delete a pro- grammed recording Timer How to change a programmed recording TimerTurn OFF VCR for Timer Recording appears on the screen Video recorder does not reactSwitching the status display off or on Which settings can I choose?Other functions Continuous playbackAutomatic switch-off Blue Background on or offBefore you call an engineer Philips Norge AS Philips Austria Gmbh

MA4CMH20MRE, E4PIN, P406TAT specifications

The Philips P406TAT, E4PIN, and MA4CMH20MRE are remarkable products in the realm of innovative lighting solutions, showcasing Philips' commitment to blending technology and functionality for enhanced user experience. Each product possesses unique features tailored to meet specific lighting needs while ensuring energy efficiency and sustainability.

The Philips P406TAT stands out with its advanced LED technology. This model is designed for both commercial and residential applications, offering high lumen output with minimal energy consumption. The P406TAT features a built-in dimming capability, allowing users to adjust the brightness according to their preferences or the specific requirements of a space. Moreover, its sleek and modern design makes it a visually appealing addition to any environment, providing not only illumination but also an enhancement to the overall aesthetic. The robust construction ensures durability, making it suitable for varied settings, from offices to outdoor environments.

The E4PIN model focuses on versatility and efficiency. This innovative lighting solution is compact and lightweight, making it ideal for tight spaces where traditional lighting fixtures may not fit. The E4PIN employs Philips' proprietary SmartLight technology, which allows for customizable lighting scenarios, enhancing convenience for users. This model is particularly suited for retail and exhibition spaces, providing bright, consistent light that draws attention to products without causing glare. With its long lifespan and reduced environmental impact, the E4PIN is an excellent choice for businesses looking to reduce their carbon footprint while maintaining high-quality lighting.

Meanwhile, the MA4CMH20MRE exemplifies Philips' expertise in high-intensity discharge lighting. This model is engineered with a ceramic metal halide lamp, delivering premium color rendering and high luminous efficacy. The MA4CMH20MRE is primarily intended for outdoor lighting applications, such as street lighting and sports venues, providing powerful illumination that enhances safety and visibility. Featuring a quick warm-up time, this model reaches optimal brightness almost instantly, making it a reliable choice for various outdoor settings. The advanced thermal management system ensures sustained performance even during prolonged use, significantly reducing the need for maintenance.

In conclusion, the Philips P406TAT, E4PIN, and MA4CMH20MRE are exemplary representations of the brand's dedication to innovation in lighting technology. With an emphasis on efficiency, versatility, and durability, these products cater to diverse lighting needs while promoting a sustainable future.
Top Page Image Contents