Philips LTC 3963/51 manual Full, Half, Off

Page 16

SETUP (Continued)

SETTING [OPTIONS] ITEMS

OSD TYPE: The TIME/DATE display was not designed to appear at the factory. If you wish to record the time/date together with image, perform the following procedure:

There are two types of TIME/DATE display: FULL and HALF.

FULL

DATE

POWER LOSS (IF SENSED)

DAY OF WEEK

ALARM COUNT*

20–12–1999 PL MON A00

6 : 12 : 00 09 T L

SECURITY LOCK (IF ACTIVATED)

TIMER (IF ON)

RECORDING SPEED (IN TOTAL HOURS)

TIME

*The ALARM Count Number records alarms from 0 to 99 and then resets to 0 and continues counting.

HALF

DATE

No display

20

–12

–1999

6

: 12

: 00

TIME

OFF

No display

1.Press the START/STOP button twice so that [OPTIONS] flashes on/off.

2.Press the SET button so that the OSD TYPE: set- ting flashes on/off.

3.Press the UP or DOWN button to select the setting (OFF, FULL or HALF).

4.Press the START/STOP button again. The selected setting will light.

Note: The position of the TIME/DATE display on the monitor can be adjusted by using the H-POS and V-POS button on the front panel.

TIME ADJUST: When two or more of this VCR model are connected to pins i TIME ADJUST of each EXTERNAL INTERFACE jack, the clocks in both VCRs can automatically be set to the same time (TIME ADJUST function).

To use the TIME ADJUST function, set one VCR to MASTER and any others to SLAVE.

1.Press the START/STOP button twice so that [OPTIONS] flashes on/off.

2.Press the SET button twice so that the TIME ADJUST: setting flashes on/off.

3.Press the UP or DOWN button to select the setting (SLAVE or MASTER).

4.Press the START/STOP button again. The selec- ted setting will light.

Notes:

You can set OSD TYPE and TIME ADJUST after you have set the date and time.

The TIME ADJUST function operates only when the VCRs are turned on. Therefore, turn the VCRs on around 2:00:05. This function will not operate if the times on the MASTER and SLAVE VCRs drift by more than one hour and 30 minutes.

SUMMER TIME FUNCTION

Set the summer time function when a cassette is not loaded in this VCR.

Press the SUMMER TIME and UP buttons simul- taneously in modes other than the timer recording standby mode; the hour display will be counted up by one.

Press the SUMMER TIME and DOWN buttons simul- taneously to count the hour display down by one. You can change the hour display in one-hour steps without any limit by pressing the above buttons. Note: Summer time cannot be set unless TIME/ DATE is displayed.

SETTING THE TIMER

To set the 24 Hour On/Off Timer function

PROGRAM NUMBER

TIMER RECORDING TIME START/STOP

TIMER RECORDING TAPE SPEED

1

0 : 00 a 0 : 00

09

2

0 : 00 a 0 : 00

09

3

0 : 00 a 0 : 00

09

4

0 : 00

a 0 : 00

09

5

0 : 00

a 0 : 00

09

6

0 : 00

a 0 : 00

09

7

0 : 00

a 0 : 00

09

MON:,TUE :,WED :,

THU :,FR I :,SAT :,

SUN:,

DAY OF WEEK AND PROGRAM NUMBER

1:TIMER will record for the time set for PROGRAM NUMBER 1

2:TIMER will record for the time set for PROGRAM NUMBER 2

3:TIMER will record for the time set for PROGRAM NUMBER 3

4:TIMER will record for the time set for PROGRAM NUMBER 4

5:TIMER will record for the time set for PROGRAM NUMBER 5

6:TIMER will record for the time set for PROGRAM NUMBER 6

7:TIMER will record for the time set for PROGRAM NUMBER 7

:No recording

TIMER Display Format Description

15

Image 16
Contents Time-lapse Video Recorder Important Safeguards Service Description InstallationService Centers UnpackingFeatures Contents Precautions Controls and Functions Front Eject Button Reverse Play Button Field Reverse ButtonStill Button Field Advance ButtonDisplay Video External Interface 15-PIN Jack Video OUTAudio Audio OUTVideo Connections Using the 15-PIN AdapterAudio Connections External Connections Time Adjust Camera SW OUTREC Start REC OUTCassette Tapes Setup Setting the Program FunctionsSetting the Time and Date Use the Clock SET display to set the date and timeHalf FullOFF To correct information ExampleVideo Mode AUTO, COLOUR, B/W Selection Menu 1 Format DescriptionAlarm OUT on or OFF Tape END on or OFFTrouble on or OFF No Video on or OFFDuration Manual To recall the Alarm display To reset the Alarm memoryOperation Tape RecordingAuto REC Check ONE Shot RecordingRecycle Alarms Present on Results Recorded Tape Alarm RecordingLock Adjust PlaybackAlarm Index Search Playback in the Field ADVANCE/REVERSE ModesOperating the VCR from a Personal Computer Ascii codeDisplay character code Communication ProtocolFormat of Commands and Status Operating the VCR from a Personal ComputerXvcr ? Symbol Identification Type of code Details of code Problem Guide MonitorSpecifications MaintenanceSome DO’S and DON’TS on Safe USE of Equipment Page LTC 3963/61 FCC & Ices Information A. and Canadian Models OnlySafety Precautions Features Contents Precautions 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Stop Button Fast FORWARD/VISUAL Search Button REC Rear Installation External Connections External Connections TDK Type OFF Time HOUR, MINUTE, Second Date MONTH, DAY, Year  4  To correct information Camera SW 18~, ALL, 06 only Setting the Buzzer Alarm Recording Tape Speed 06~240 Alarm Memory Recall and Reset Operation Alarm Recording Operation PL MON A00 12 00P 06 T L Xver ONE Shot REC Xvcr bbb, s, w, l, v, a One numeral 0~7 Problem Guide Specifications