ENGLISH
IMPORTANT SAFEGUARDS
1.Read Instructions — All the safety and operating instructions should be read before the unit is operated.
2.Retain Instructions — The safety and operating instructions should be retained for future reference.
3.Heed Warnings — All warnings on the unit and in the operating instructions should be adhered to.
4.Follow Instructions — All operating and use instructions should be followed.
5.Cleaning — Unplug the unit from the outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6.Attachments — Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7.Water and Moisture — Do not use this unit near water – for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, near a swimming pool, in an unprotected out- door installation, or any area which is classified as a wet location.
8.Accessories — Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit may fall, causing serious injury to a person and serious damage to the unit. Use only with a stand, tri- pod, bracket, or mount recommended by the manufacturer, or sold with the product. Any mounting of the unit should follow the manufacturer’s instructions, and should use a mounting access- ory recommended by the manufacturer.
An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
9.Ventilation — Openings in the enclosure, if any, are provided for ventilation and to ensure reliable operation of the unit and to pro- tect it from overheating. These openings must not be blocked or covered. This unit should not be placed in a
10.Power Sources — This unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply you plan to use, consult your appliance dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions.
11.Grounding or Polarization — This unit may be equipped with a polarized
Alternately, this unit may be equipped with a
12.
13.Power Lines — An outdoor system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outdoor system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. U.S.A. models only – refer to the National Electrical Code Article 820 regarding installation of CATV systems.
14.Overloading — Do not overload outlets and extension cords as this can result in a risk of fire or electric shock.
15.Object and Liquid Entry — Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or
16.Servicing — Do not attempt to service this unit yourself as open- ing or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
17.Damage Requiring Service — Unplug the unit from the outlet and refer servicing to qualified service personnel under the following conditions.
a.When the
b.If liquid has been spilled, or objects have fallen into the unit.
c.If the unit has been exposed to rain or water.
d.If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to its normal operation.
e.If the unit has been dropped or the cabinet has been damaged.
f.When the unit exhibits a distinct change in performance – this indicates a need for service.
18.Replacement Parts — When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the orig- inal part. Unauthorized substitutions may result in fire, electric shock or other hazards.
19.Safety Check — Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to deter- mine that the unit is in proper operating condition.
20.Coax Grounding — If an outside cable system is connected to the unit, be sure the cable system is grounded. U.S.A. models only – Section 810 of the National Electrical Code, ANSI/NFPA No. 70- 1981, provides information with respect to proper grounding of the mount and supporting structure, grounding of the coax to a discharge unit, size of grounding conductors, location of discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
21.Lightning — For added protection of this unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the unit due to lightning and
FCC & ICES INFORMATION
(U.S.A. and Canadian Models Only)
WARNING — This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Intentional or unintentional changes or modifications not expressly approved by the party responsible for compliance shall not be made. Any such changes or modifications could void the user’s authority to operate the equipment.
This Class B digital apparatus meets all requirements of the Canadian
The user may find the following booklet prepared by the Federal Communications Commission helpful: “How to Identify and Resolve
1