4Tape Mode/Rec Mode indicator (SP/LP/EP)
5
6Colour system indicator
Any selected colour TV system except [AUTO] appears on screen display. See the “To Set the Colour TV System” (page 7).
7NAVI CHECK indicator
During playback, press the [STATUS/ NAVI CHECK] (32) repeatedly until the NAVI CHECK indicator appears. You can check the property of the programme being played.
However, this function is effective only for programmes recorded with setting the [JET NAVIGATOR] to [ON]. (See to the right.)
Clock # Counter # Remaining Tape Time #
#NAVI CHECK indicator # Clock
•The VCR is checking the programme information while the message [CHECKING DATA] is displayed.
•When the message [DATA NOT FOUND] appears, the NAVI CHECK indicator cannot be displayed.
Note:
•The On Screen Display may be disturbed or disappeared during special playback.
Option Setting
MENU |
|
|
|
| OPTION |
| |||||
CLOCK SET |
| TAPE SELECT | [AUTO] | ||||||||
TUNER PRESET |
| NTSC INPUT SELECT | [AUTO] | ||||||||
SYSTEM |
| NTSC PB SELECT | [onPALTV] | ||||||||
OPTION |
| JET NAVIGATOR | [OFF] | ||||||||
| DELETE NAVIDATA | [NO] | |||||||||
TAPE REFRESH |
| ||||||||||
| OSD REC | [OFF] | |||||||||
NAVI MEMORY 0PROG. |
| ||||||||||
| OSD | [AUTO] | |||||||||
SELECT : |
|
| , ENTER |
|
|
|
|
|
|
|
|
END : MENU |
|
|
|
|
|
|
|
| |||
|
|
|
|
| SELECT : |
|
|
|
|
| END: MENU |
1Press [MENU] (9) to display the Main menu on the TV screen.
2Press [43] (28) to select [OPTION] then press [ENTER] (26).
3Press [43] (28) to select the desired field.
TAPE SELECT: | To select the corresponding video |
| cassette tape length to display the |
| approximate remaining tape time. |
•Press [2 1] (28) to select the corresponding video cassette tape length.
AUTO:The VCR automatically distinguishes E30,
E195: For E195 tape
E260: For E260 tape
E300: For E300 tape
•The remaining tape time may not be displayed correctly depending on the tape used.
NTSC INPUT SELECT:To select the colour TV system used to record NTSC signals.
•Press [2 1] (28) to select [AUTO]. Allows NTSC [4.43] or [3.58] signals to be distinguished automatically.
•If the tape has not recorded correctly, select 4.43 or 3.58. 4.43: When recording NTSC 4.43 signals.
3.58: When recording NTSC 3.58 signals.
•Some programmes on NTSC 3.58 system cannot be recorded correctly by selecting [3.58].
NTSC PB SELECT: To select the colour TV system of the TV used to play back a tape recording NTSC signals.
•Press [2 1] (28) to select the desired position according to the colour TV system of the TV.
on PAL TV: For TVs that can receive PAL signals.
4.43: For TVs that can receive NTSC 4.43 signals.
3.58: For TVs that can receive NTSC 3.58 signals.
JET NAVIGATOR: | To set the conditions for the Jet | |
|
| Navigator Function. |
• Press [2 1] (28) to select [ON] or [OFF]. | ||
OFF: | Initially set at this position. | |
ON: | Jet Navigator function works. If you select [ON], | |
| [OSD REC] is set to [OFF] automatically. | |
|
| |
DELETE NAVIDATA: | To delete all the Jet Navigator data | |
|
| stored in the VCR memory. |
•Press [2 1] (28) to select [ENTER] then press [ENTER] (26) to do the deletion.
NO: | Initially set at this position. |
ENTER: | It is done to delete all the Jet Navigator data. |
|
|
8