Adjusting the video recorder (VCR) to the camcorder (CC)
You can synchronously copy between this video recorder (VCR) and an appropriately equipped camcor- der (CC). Both units are started at the same time with the help of a synchronous impulse and an adjustable start delay (= preroll time).
Various operating and cabling variants are possible. You will find an overview of the
Connect the two units with the corresponding synchro- edit cable (socket Dor /on your video recorder).
Connect the video/audio source to the input sockets
©("E3") or ("E4") and »+ ¼(audio input sockets for "E3" and "E4") of the video recorder.
The sockets are to be found behind the flap at the front of the recorder.
Please also observe the operating instructions of the camcorder.
Insert a cassette without erase protection into the video recorder
!Switch on the TV set and select the programme position intended for the video recorder.
"Switch the video recorder on.
Select the programme position "E3" or "E4".
¤Press the lbutton. The OSD page "MAIN MENU" appears on the picture screen.
Select the menu option "A/V Edit". Confirm with the Gbutton.
$The OSD page "EDIT MENU" appears on the picture screen; the option "Edit Setup" is highlighted.
Confirm with the Gbutton.
Follow the user guide on the OSD page.
%Switch the camcorder to still picture (playback- pause).
&Press the Bbutton on the video recorder's remote control. Wait until the video recorder has recognized the connected camcorder.
Follow the user guide on the OSD page.
/You can call up the default start delay (= preroll time) for the connected camcorder type by pressing the mbutton. It is then possible to alter the preroll time with the For Gbutton. Press the Ibutton.
(Select the desired insert edit function: "Insert Dubbing" or "Insert Video" or "Insert Copy".
)Confirm with the lbutton.
Note:
*The start delay (= preroll time) must be adjusted only once. The video recorder will save this setting. Keep in mind that other camcorder types must also be adjusted when being used the first time.
Synchronous editing (synchro-edit)
!Call up the OSD page "EDIT MENU".
Use the Ibutton to select the option "Synchro Edit". Confirm with the Gbutton.
"The OSD page "SYNCHRO EDIT" corresponding to the connected camcorder type appears on the picture screen.
¤Use the ¨button to select the OSD page "Recorder" (for video recorder mode). Search the beginning of the recording on the video recorder.
Switch the video recorder to
$Use the ;button to select the OSD page "Player" (for camcorder mode).
Search the beginning of the recording on the camcorder.
Use the slider controls {}to adjust the recording level so that the "0 dB" mark lights up during the loudest passages of the recording.
Switch the camcorder to still picture (playback- pause).
Follow the user guide on the OSD page.
The way copying is started depends on the camcorder and the corresponding
30