Philips VR 969/02 Inserting the batteries into the remote control, Connecting to the aerial

Inserting the batteries into the remote control

!Remove the battery holder from the back of the remote control.

To do this, squeeze the holder at the lateral marks (1.) and pull it off (2.).

"nsert the batteries as indicated in the battery holder.

¤Close the battery holder by sliding it into the remote control until you hear a "click"

Note:

*So that the battery operates correctly, it must always be pointed at the TV set.

Connecting to the aerial

Your video recorder could actually be referred to as a "TV set without picture screen".

This is why you have to connect it to an aerial as well as to a TV set. Only then you can make recordings and play cassettes.

RS 232

2 EXTERNAL / DEC.- AV 2

	AUDIO
L	L	1 EXTERNAL / EURO-AV 1
O	I
U		S-VHS OUT
T	N

RR

!Remove the aerial cable plug from the TV set and insert it into the 3socket at the rear of the video recorder.

"Use the aerial cable supplied to connect the 4 socket on the video recorder with the aerial input socket on your TV set.

Both the TV set and the video recorder are now connected to the aerial.

6