Philips VRA601AT owner manual Recording, Insert a tape with its record tab intact in the VCR

Page 25

Read and follow the steps below to record a television program.

1

Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the VCR is set to.

2

Insert a tape with its record tab intact in the VCR.

3

If the VCR/TV light appears on the display panel, go to step 4. If

the VCR/TV light does not appear, press the VCR/TV but- ton once.

4

Press the SPEED button until the desired tape speed appears briefly on the screen. (Details about tape speed are on

page 30.)

5

Use the CHANNEL o/p buttons or the Number buttons to select the channel to be recorded.

6

Press the REC(ord)/OTR button once to start recording.

The REC(ord) light will appear.

7

To pause the recording, press the PAUSE/STILL button once. The REC(ord) light will flash. To resume recording, press the REC(ord)/OTR button or press the PAUSE/STILL button again. The REC(ord) light will come on again.

8

To stop recording, press the STOP/p button.

Recording 25

1Turn on the TV.

2Insert a tape in the VCR.

3

POWER

 

VCR/TV

EJECT

 

 

1

2

3

 

 

 

4

5

6

 

5

 

 

0

 

CHANNEL

4

7

8

9

 

 

SPEED

TIME SEARCH

MEMORY

 

 

MENU

STATUS/EXIT

CLEAR

SLOW

 

6

REWIND

/PLAY

F.FWD

7

REC/OTR

/STOP

PAUSE/STILL

8

 

 

 

 

 

Helpful Hints

If you press the REC(ord)/OTR but- ton when there is not a tape in the VCR, NO CASSETTE will flash on the screen.

If you press the REC(ord)/OTR but- ton while a tape without a record tab is in the VCR, the VCR will eject the tape and PROTECTED CAS- SETTE CANNOT RECORD will flash on the screen.

Other recording options are on pages 26-32.

You can change the tape speed during a recording, but some distor- tion will appear on the tape.

The VCR will record in a preset vol- ume.

Image 25
Contents VRA601AT For Customer Use Dear Philips Magnavox product ownerThis bolt of lightning indi- cates uninsulated material Model No Serial NoSafety Precautions FeaturesIntroduction Table of Contents Putting Batteries in the Remote Control Before Using Your VCRVCR maintenance Removing the Plastic Cover from the Front PanelDisconnect the antenna or cable from your TV Hookups Without a Cable Box/Direct Broadcast SystemPlug in the TV and the VCR Hookups Without a Cable Box/Direct Broadcast System cont’dConnections Hookups With a Cable Box/Direct Broadcast SystemRecording/Viewing Any Channel TV’s Antenna Recording One Channel/Watching AnotherVideo Cable Hookups With a Stereo TV2Turn on the TV Turning on Your VCRPress the Menu button. The display shown below will appear Press the Menu button Automatic Channel SetupAdding/Deleting Channels Automatic Channel Setup cont’dPress the STATUS/EXIT button once or twice to exit Reviewing Memorized ChannelsYou make each entry within 60 seconds of the previous entry Follow the steps below to set your VCR’s clock. Make sureDaylight-Savings Time Language Selection Remote Control Buttons Eject Button Remote Control Buttons cont’dPress to eject the tape Clear ButtonStatus Display example only On-Screen Status DisplaysIf you select Status ON, then select Counter only on If you select Status ON, then select Counter only OFFVCR Display Panel Front Panel Rear Panel Read and follow the steps below to play a tape Playing1Turn on the TV 2Insert a tape in the VCR Insert a tape with its record tab intact in the VCR RecordingRECord light will appear Recording One Channel/Watching Another One-Touch Recording Do each step within 60 seconds of the previous step Timer RecordingDaily Timer Recording cont’d Tape Speeds Timer Recording cont’dChecking or Cancelling Timer Recordings RF coaxial cable Rerecording Tape DuplicationPress the PLAY/o button or the STOP/p button to select Repeat PlayPress the F.FWD/B button so that on appears beside Real-Time Counter Memory Press the Time Search button Time SearchForward and Reverse Searching SP/LP/SLP Special Effects PlaybackSuper High Speed Searching LP/SLP Viewing a Still PictureAutomatic Operation Features Understanding On-Screen Displays Multi-Channel Television Sound SystemSpecifically… MonitorMulti-Channel Television Sound System cont’d Hi-Fi Stereo Sound System HIFI. on will appear to the right of Hifi on the screen Hi-Fi Stereo Sound System cont’dPlease see additional notes on Helpful Hints Helpful Hints cont’d Cable Box/DBS Output Channel 03 or GlossarySpecifications Model # Serial # Limited WarrantyRemote control PowerTimer AutomaticSupplied Accessories