SETTING UP (CONTINUED)
When the auto programming is completed
The following message appears on the TV, and the lowest channel will be tuned in.
AUTO CH.SET COMPLETED
Now you have finished the initial set up procedure.
If you stop the initial setup procedure while it is proceeding:
The VCR enters the initial setup mode again the next time your turn on the VCR.
Initial setup will not start in the following cases:
•If there is a tape inserted.
•If any one of the initial setup procedures is finished manually.
To reset the clock manually
You can also reset or correct the clock manually.
1Press VCR.
2Press MENU.
3Press 5or °to select “INITIAL SET UP” then press 3.
The Initial Set Up menu appears.
4Press 5or °to select “SET CLOCK” then press 3/OK.
5Press 5or °to set the time, then press 3/OK.
•Each time you press 5 or °, the set time changes by
6Press 5or °to set the month and day, then press 3/OK.
•Each time you press 5 or °, the set date changes by
7Press 5or °to set the year, then press 3/OK.
•Each time you press 5 or °, the set date changes by
8Press EXIT/STATUS to exit from the menu operations.
Note:
If a power failure occurs, clock will lose its setting.
To change the language manually
You can also change the language manually.
1Press VCR.
2Press MENU.
3Press 5or °to select “INITIAL SET UP” then press 3.
The Initial Set Up menu appears.
4Press 5or °to select “LANGUAGE.”
5Press 3/OK to select the language on the TV screen.
Each time you press the button, the language changes as follows:
=English= 
=
6Press EXIT/STATUS to exit from the menu operations.
If you want to delete unwanted channels
You can delete channels manually. After you have deleted the channels, they will be not selected by pressing CH 5/°.
1Press VCR.
2Press MENU.
3Press 5or °to select “TUNER SET UP” then press 3/OK.
4Press 5or °to
select “CHANG- | CH FRQ SYS | CH | FRQ SYS | |||
01 | 150 | BG | 07 | 229 | BG | |
ING TUNER SET | 02 | 165 | BG | 08 | 237 | BG |
03 | 195 | BG | 09 | 355 | BG | |
UP” then press | 04 | 205 | BG | 10 | 365 | BG |
06 | 221 | BG | 12 | 384 | BG | |
| 05 | 213 | BG | 11 | 374 | BG |
3/OK. | SELECT=5° DELETE=CLEAR | |||||
TO CHANGE CH PUSH 3/OK | ||||||
TO END PUSH EXIT
The programmed
channel information list appears with the settings of the tuned channel flashing. (You can also watch the picture of the tuned channel since the list and the picture alternates on the TV.)
5Press 5or °until an unwanted channel setting flashes.
6Press CLEAR to delete the unwanted
channel.
•If you have accidentally deleted a channel, press 2.
7Repeat steps 5 and 6 until you delete all unwanted channels.
8Press EXIT/STATUS to exit from the menu operations.
If you want to exchange the channel positions
You can also replace the channel position numbers.
EX. Replace channel 9 and channel 3
1Press VCR.
2Press MENU.
3Press 5or °to select “TUNER SET UP” then press 3/OK.
4Press 5or °to select “CHANGING TUNER SET UP” then press 3/OK.
5Press 5or °until information for channel 3 flashes.
6Press 3/OK once.
Only channel indication for channel 3 starts flashing.
7Press 0 then 9.
The channel settings for channel 3
and 9 are exchanged.
•If you have accidentally deleted a channel, press 2.
8Press 3/OK to store the setting.
9Press EXIT/STATUS to exit from the menu operations.
If the picture is not clear
You need to
EX. Fine-tune channel 3
1Press VCR.
2Press MENU.
3Press 5or °to select “TUNER SET UP” then press 3/OK.
4Press 5or °to select “CHANGING TUNER SET UP” then press 3/OK.
5Press 5or °until information for channel 3 flashes.
6Press 3/OK twice.
Only frequency indication for channel 3 starts flashing.
7Press 5or °to
8Press 3/OK to store the setting.
9Press EXIT/STATUS to exit from the menu operations.
— 12 —
12 | 6/1/99, 9:02 AM |