Tracking Adjustments
Auto tracking
Each time a tape is inserted, auto tracking starts working and continuously analyses the signal to adjust for optimum picture quality during playback. So, there is no need for you to minimize noises in most tapes during playback.
Manual tracking
•During normal playback:
If auto tracking cannot eliminate noises well during playback, press
CHANNEL 5or °.
•During a slow motion picture: Press CHANNEL 5or °to minimize noises in the slow motion picture.
•During a still picture:
Press CHANNEL 5or °to reduce jitter in the still picture.
To cancel manual tracking, stop the tape, eject the tape, then
Timer Recording
To record while you’re away, follow step 1 — 10 below. For each programme you set, the VCR will turn on, start recording, and turn off automatically. You can store up to 8 programmes.
Make sure....
•The clock is set to the correct time before setting timer recording.
•A cassette is inserted in the VCR and the record tab of the cassette must not be removed.
FOR EACH STEP BELOW, YOU NEED TO FINISH WITHIN 60 SECONDS; OTHERWISE, PROGRAMMING WILL HAVE TO BE RESTARTED FROM STEP 1.
1Select Timer Mode
Press TIMER. | SELECT | CHOOSE /OK |
The Timer Recording | QUICK PROGRAMMING | |
menu appears. | PROGRAM REVIEW | |
|
| |
| TO END PUSH EXIT | |
2Select Programme mode | ||
1 Press 5or °to | PROGRAM | 1 |
| ONE TIME PROGRAM | |
select “QUICK | CHANNEL+/– – – | |
START +/– | – | |
PROGRAM- | STOP +/– | – |
REC SPEED SP | ||
MING” then press | DATE +/– | – |
SET DAILY=8 OR WEEKLY=9 | ||
3/OK. | TO END PUSH EXIT | |
|
| |
The Quick Programming menu appears.
•If you have already made 8 pro- grammes, “ALL PROGRAMS IN USE” appears and goes back to the Timer Recording menu. If this happens, delete unwanted programmes (✈P.18).
— 17 —
3Select Channel
Press CH 5or °to | ONE TIME PROGRAM | |
PROGRAM | 1 | |
enter the TV channel. | CHANNEL+/– 12 | |
START +/– | – | |
• To record from | STOP +/– | – |
REC SPEED | SP | |
external line input, | DATE +/– | – |
SET DAILY=8 OR WEEKLY=9 | ||
press CH 5or ° | TO END PUSH EXIT | |
until “A/V REAR” or “A/V FRONT” appears on the TV screen.
4Select Start Time
Press START + or – (Number button 1 or 4).
• Each time you press the button, the set
time changes by
5Select Stop Time
Press STOP + or – (Number button 2 or 5).
• Each time you press the button, the set
time changes by
6Select Tape Speed
Press SPEED. | PROGRAM | 1 | |
| ONE TIME PROGRAM | ||
• Each time you press | CHANNEL+/– 12 | ||
START +/– | 08 : 30 | ||
the button, the tape | STOP +/– | 09 : 30 | |
REC SPEED | LP | ||
speed alternates | DATE +/– | – | |
SET DAILY=8 OR WEEKLY=9 | |||
between “LP” and | |||
TO END PUSH EXIT | |||
|
| ||
“SP.” |
|
| |
7Select Start Date |
| ||
Press DATE + or – | PROGRAM | 1 | |
| ONE TIME PROGRAM | ||
(Number button 3 or | CHANNEL+/– 12 | ||
START +/– | 08 : 30 | ||
6). | STOP +/– | 09 : 30 | |
REC SPEED | LP | ||
• The year and day of | DATE +/– | 07/04/98 | |
| FRIDAY | ||
SET DAILY=8 OR WEEKLY=9 | |||
the week is displayed | TO END PUSH EXIT | ||
automatically.
To be continued on the next page
17 | 6/1/99, 9:04 AM |