GETTING CONNECTED UP
VCR to TV Connection
Connection
Diagram
1Disconnect the antenna or Cable from the TV and the AC power cord of the TV from the AC outlet.
2Connect the antenna or Cable to the VCR.
3Connect the VCR to the TV using the RF coaxial cable.
4Plug the AC power cords of the VCR and TV into the AC out- lets.
Outdoor antenna | Indoor antenna |
ANT. IN | Back of TV |
| ENTREE |
| ANT.IN |
ENTREE/SORTIE | ANTENNE |
AV1 IN/OUT | SORTIE |
| RF. OUT |
002 
Cable | Back of VCR |
|
RF OUT
VHF
UHF 
RF coaxial cable (supplied)
CAUTION
Do not plug the AC power cords until all connections are completed.
To watch a picture from this VCR on the TV, select UHF E36 channel (video channel of this VCR when shipped from the factory). If you want to change video channel, see “Setting the Video Chan- nel” ( ✈.P10).
VCR to AV TV Connection Using SCART Cable
With this connection, you can get better pictures and sounds when playing back a tape.
To watch a picture from this VCR on the
TV, select the video input on the TV, to which | Back of VCR | |
| ||
this VCR is connected. |
|
|
Use the appropriate SCART cable depending |
|
|
on the TV’s AV terminal. |
| AV1 IN/OUTENTREE/SORTIE |
|
| 002 |
| To AV1 IN/OUT terminal | |
Back of TV
ENTREE
ANT.IN
ANTENNE
SORTIE
RF. OUT
To AV
SCART cable | terminal |
| |
| OUT |
| IN: (Not used) |
— 9 —
9 | 6/1/99, 9:02 AM |