1990 Series Instruction Sheet
For additional help visit www.otterbox.com or call 888.695.8820
Step 4 - Install Hard Shell
Place the front of the device into the front piece of the hard shell.
Take the back piece and snap the two halves together.
Step 4
OTTERBOX COM
Step 5
Step 6
Step 7
Step 5 - Install Silicone Skin
Wrap the silicone around the hard shell, making sure everything aligns.
Close all the access plugs.
Step 6 - Install Stylus
The 1990 case has an external stylus holder designed to be used with the OtterBox tethered stylus.
Peel off the back of the adhesive on the stylus mount and press firmly into the circular groove above the stand. If the tether is not necessary, it can be cut off and used without the the tether.
Step 7 - Install Hand Strap/ Shoulder Strap (sold separately)
The case comes with 1 hand strap that can be mounted on either side of the case.
To install the hand strap, or optional shoulder strap, use the included screws mounts and wrench. Screw one mount on the top and one on the bottom. Do not overtighten.
The hand strap or shoulder strap can now be attached to the mounts.
An additional/ replacement hand strap or shoulder strap can be ordered separately.
Note: The stock OEM Samsung lanyard is compatible with the hand strap/ shoulder strap mounts.
Stand
A
Ports
All I/O ports are accessible through silicone plugs.
Warranty
WARRANTY INFO
OtterBox products come with a ONE (1) YEAR Limited Warranty from the date of the retail purchase by the original
Call us at 888.695.8820 or email us at customerservice@otterbox.com
SM40138C