Hitachi KH-182B manual Mask

Page 14

It is recommended that when using the device for the first time or if you feel some discomfort, use the device in "Low."

4Hold the device with your hand touching the back plate of the body. (Fig. 7)

Make sure to hold the body with your hand touching the back plate.

5Apply the head directly to the skin and move it slowly. (Fig. 8)

The mode indicator lamp will switch and turn on, and the device will start to vibrate.

The time for use is within 5 minutes.

CAUTION

Unless you apply the head to your skin while touching the back plate, the device will not vibrate. (skin sensing function)

If the head is not vibrating, the device is not working.

If you leave the device as it is for about 5 minutes without vibration, the device will automatically switch "Off." (Automatic shutoff function)

Add more toner or other moisturizing product when the head does not easily slide.

Apply the cotton gently to the face and slowly move the device by sliding it from the center of the face to the outer side.

Do not keep the head in the same area of the skin, but move it around. (Cause of problems with your skin or physical discomfort.)

Do not apply the device on the same area of skin for more than 10 seconds.

If you feel your skin tingling by micro current while using the device, press the Level switch button and switch to "Low." If you still feel your skin tingling, use the device by adding more toner or other cosmetics.

6After 5 minutes have elapsed, the device will automatically shut off. (Auto shutoff function)

The finish sound (beep beep) will inform you.

7Wipe off the moisturizing product on the head and the body of the device with a tissue.

Step 3 "MASK"

(It is recommended that you use “Mask” once a day for milky lotion or moisturizing product once or twice a week for sheet mask.)

Fine vibrations and gentle switching of the electrode enhance the effect of milky lotion or sheet mask.

1Place the sheet mask on your face or apply your regular milky lotion or moisturizing product over your face evenly.

Wipe off the milky lotion or moisturizing product on your hands.

2Press the power switch. (Fig. 11)

The level indicator lamp will be turned on, and the "Refresh" on the mode indicator lamp will start flashing. When a lamp in another mode is flashing, press the mode switch button and switch the mode.

When the "MOISTURIZE" mode is finished, press the power switch and the "MASK" mode will automatically be set.

3Choose "the strength" of electrical potential with the Level switch button.

Switch the "strength" with the Level switch button according to the condition of your skin.

Every time the Level switch button is pressed, the high and low in the electrical potential will be switched. There will be no change in vibration strength.

The memory function memorizes the "strength" when the power has been shut off.

-10-

Image 14
Contents Page English 1~14 Page Page Safety precautions EnglishCause of a failure or short circuit Motion. Cause of skin trouble or poor physical condition Preparation before use How to chargeNames of parts and their functions Fig Time to charge Moisturize treatment Required time approximate 10 minutes Examples of useQuick treatment Required time approximate 5 minutes Weekly treatment Required time approximate 15 minutes How to useDaily treatment Required time approximate 15 minutes When using cotton When not using cotton Mask About memory function How to use with ACAbout skin sensing function How to remove the nickel-hydrogen batteries How to preserveSpecifications Care for main bodyAbout Skin Sensing Function FAQs Page Page Page Page Page Page Page Page Page Page Page Page