It is recommended that when using the device for the first time or if you feel some discomfort, use the device in "LOW."
4Hold the device with your hand touching the back plate of the body. (Fig. 7)
●Make sure to hold the body with your hand touching the back plate.
5Apply and move the head slowly. (Fig. 8)
When using a sheet mask, slide the head over the sheet mask.
●The mode indicator lamp will switch and turn on, and the device will start to vibrate.
●The time for use is within 5 minutes.
CAUTION
Unless you apply the head to your skin while touching the back plate, the device will not vibrate. (skin sensing function)
If the head is not vibrating, the device is not working.
If you leave the device as it is for about 5 minutes without vibration, the device will automatically switch "Off." (Automatic shutoff function)
●Apply the head gently to the face and slowly move the device by sliding it from the center of the face to the outer side.
Do not keep the head in the same area of the skin, but move it around. (Cause of problems with your skin or poor health)
●Do not apply the device on the same area of skin for more than 10 seconds.
●If you feel your skin tingling by micro current while using the device, press the level
switch button and switch to "Low."
6After 5 minutes have elapsed, the device will automatically shut off. (Auto shutoff function)
●The finish sound (beep beep) will inform you.
7Wipe off the moisturizing product on the head and the body of the device with a tissue.
How to use with AC
Avoid using in a place where water is splashed such as a bathroom or in a place with high moisture.
(Cause of electric shocks and short circuits)
1Connect the power adaptor to the main body and outlet.
●Follow "How to use" for use.
While the device is being used, the battery indicator lamp will be off.
2Make sure to pull out the power adaptor from the outlet and the body.
About skin sensing function
This device is a product which operates through the human body.
Applying the skin to the back plate and the head will make an electrical circuit start to operate. Unless you touch the back plate and apply the head to the skin, it will not start to operate.
About memory function
This device is equipped with a memory function to store memory of the electrical potential "strength" levels of “HIGH,” “MEDIUM,” or “LOW”.
In each usage mode (Step 1 to 3), the device stores memory of the "strength" level just before the automatic shutoff or the power switch is turned "off."
If the level switch button is pressed while the device is being used, the electric potential "strength" can be switched.