Harman-Kardon Car Stereo System, 376 owner manual DPR 2005 Technical Specifications

Page 52

DPR 2005 TECHNICAL SPECIFICATIONS

Audio Section

Stereo Mode

Continuous Average Power (FTC)

120 Watts per channel, 20Hz–20kHz,

@ <0.15% THD, both channels driven into 8 ohms

Seven-Channel Surround Modes

Power per Individual Channel

Front L&R channels:

120 Watts per channel

@ <0.15% THD, 20Hz–20kHz into 8 ohms

Center channel:

120 Watts @ <0.15% THD, 20Hz–20kHz into 8 ohms

Surround (L & R Side, L & R back) channels: 120 Watts per channel

@ <0.15% THD, 20Hz–20kHz into 8 ohms

Input Sensitivity/Impedance

 

Linear (High-Level)

200mV/47k ohms

Signal-to-Noise Ratio (IHF-A)

97dB

Surround System Adjacent Channel Separation

Pro Logic I/II/IIx

40dB

Dolby Digital

55dB

DTS

55dB

Transient Intermodulation

 

Distortion (TIM)

Unmeasurable

FM Tuner Section

 

Frequency Range

87.5 –108.0MHz

Usable Sensitivity

IHF 1.3µV/13.2dBf

Signal-to-Noise Ratio

Mono/Stereo 70/68dB

Distortion

Mono/Stereo 0.2/0.3%

Stereo Separation

40dB @ 1kHz

Selectivity

±400kHz, 70dB

Image Rejection

80dB

IF Rejection

90dB

AM Tuner Section

 

 

 

Frequency Range

520–1720 kHz

 

Signal-to-Noise Ratio

45dB

 

 

Usable Sensitivity

Loop 500 µV

 

 

Distortion

1kHz, 50% Mod 0.8%

 

Selectivity

±10kHz, 30dB

 

Video Section

 

 

 

Television Format

NTSC

 

 

Input Level/Impedance

1Vp-p /75 ohms

 

Output Level/Impedance

1Vp-p /75 ohms

 

Video Frequency Response

 

 

 

(Composite and S-Video)

10Hz–8MHz (–3dB)

 

Video Frequency Response

 

 

 

(Component Video)

10Hz–50MHz (–3dB)

 

General

 

 

 

Power Requirement

AC 120V/60Hz

 

Power Consumption

Standby:

8.9W

 

 

Idle:

58W

 

 

Max:

1073W

 

 

(7 channels driven)

 

Dimensions

Product

 

Shipping

Width

17.3 inches (440mm)

22.6 inches (573mm)

Height

4.5 inches (114mm)

8.9 inches (225mm)

Depth

18.8 inches (476mm)

21.9 inches (555mm)

Weight

23.1 lb (10.5kg)

27.5 lb (12.5kg)

Depth measurement includes knobs, buttons and terminal connections.

Height measurement includes feet and chassis.

All features and specifications are subject to change without notice.

Harman Kardon, Power for the Digital Revolution and Logic 7 are registered trademarks of Harman International Industries, Incorporated.

TM is a trademark of Harman International Industries, Incorporated (patent no. 5,386,478).

*Trademarks of Dolby Laboratories.

DTS, DTS Surround, DTS-ES and DTS Neo:6 are registered trademarks of Digital Theater Systems, Inc.

VMAx is a registered trademark of Harman International Industries, Incorporated, and is an implementation of Cooper Bauck Transaural Stereo under patent license.

HDCD system manufactured under license from Pacific Microsonics, Inc. This product is

covered by one or more of the following: in the USA: 5,479,168; 5,638,074; 5,640,161; 5,808,574;

5,838,274; 5,854,600; 5,864,311; 5,872,531; and in Australia: 669114. Other patents pending. A-BUS and A-BUS Ready are registered trademarks of Leisure Tech Electronics Pty Ltd Australia. TiVo is a registered trademark of TiVo, Inc.

Replay TV is a registered trademark of Digital Networks North America, Inc.

250 Crossways Park Drive, Woodbury, New York 11797 www.harmankardon.com

© 2004 Harman International Industries, Incorporated Part No. ZKD0401HA00-3

Image 52
Contents DPR Digital Path ReceiverDPR 2005 Digital Path Receiver See trademark acknowledgements onDescription and Features IntroductionThank You for Choosing Harman Kardon Modèle pour les CanadienSafety Information Important Safety InformationTo choose from the various mode options Surround Mode IndicatorsStandby/On Indicator This indicator is amber Modes, and then press the Surround Mode SelectorFrequency and preset number, if any AB C D E F G H I J I K REAR-PANEL Connections ‚ CD Audio Inputs Connect these jacks to REAR-PANEL Connections Main Remote Control Functions Volume Up/Down ButtonsProgram Button SPL Select Button EzSet Microphone Sensor LensChannel Up/Down Selector . To raise Have been pressedSpeaker Select Button Press this button Main Remote Control Functions Zone II Remote Control Functions Installation and Connections System InstallationSystem and Power Connections AC Power Connections BUSInstallation ConnectionsRS-232 Connections System Configuration Speaker PlacementSystem Setup Speaker Selection and PlacementInput Setup Making Configuration AdjustmentsSetting the System Configuration Memory For DVD and the Optical Digital Input 1 ‡› Navigation Button o Audio Setup Surround SetupFor added resolution Speaker OptimizerTo return to the Master Menu Speaker Setup DTS-ES Discrete. Press the ‹/› Navigation ButtonSet the unit for either 5.1 or 6.1/7.1 operation To bring up the Master MENU, press Delay SettingsMeasurement units is made, press the ⁄/¤ Using EzSet Output Level AdjustmentNavigation Button o to return the cursor to the FL position Manual Output Level Adjustment Using the EzSet remoteMENU, press the OSD Button to bring up Play shown in FigureAdditional Input Adjustments To return to normal operation of the DPRVolume and Tone Control OperationBasic Operation Source SelectionSurround Mode Selection Dolby Mode Select Button orDigital Audio Playback Digital DTS Neo6Surround Mode Chart PCM Playback Selecting a Digital SourceHdcd Playback Night Mode Speaker/Channel IndicatorsMP3 Audio Playback Tape Recording Tuner OperationFront-Panel Connections Output Level Trim Adjustment Memory BackupMenu system Dim Function Ments to make, press the OSD ButtonAdvanced Features Menu system Turn-On Volume LevelMenu system Semi-OSD Settings Button is pressed is shownMenu system Multiroom Setup Multiroom OperationMultiroom Operation Buttons ç∂dSpecific source OutputProgramming Remote Codes Configuring the RemoteRemote’s Main Menu message Learning Commands Bottom lineBe used Input Selector Button d that was justCommands from another device’s remote into the DPR remote Changing DevicesMacro. The choices are the Power On Button Remember that when you want to change devicesMacro Programming Lower line of the display and then press the Set Button qPower On VID 2/TV VID 3/Cable DPR Logic 7 h Programmed e.g., the Power On Button 1 orErasing a Macro Read a MacroVolume Punch-Through Punch-Through ConfigurationChannel Punch-Through EzSet Configuration When the red light under the Set Button q appearsRenaming Pages 27Renaming a Device Numeric KeysRenaming Individual Keys Resetting the RemoteAt this point you have two options Additional Notes on Configuring and Operating the Remote Troubleshooting Guide Processor ResetDPR 2005 Technical Specifications
Related manuals
Manual 12 pages 53.02 Kb