TROUBLESHOOTING
■Remote control
Problems | Possible Causes | Solutions | Refer to | |
page | ||||
|
|
| ||
|
|
|
| |
The remote control | The remote control is too far away or | The remote control will function within a maximum |
| |
does not work nor | tilted too much. | range of 6 m (20 ft) and no more than 30 degrees off- | 3 | |
function properly. |
| axis from the front panel. |
| |
|
|
|
| |
| Direct sunlight or lighting (from an | Reposition this unit or lighting. |
| |
| inverter type of fluorescent lamp, etc.) is |
| — | |
| striking the remote control sensor of this |
| ||
|
|
| ||
| unit. |
|
| |
|
|
|
| |
| The batteries are weak. | Replace all batteries. | 3 | |
|
|
|
|
■Notes on batteries
•Change both batteries when the operation range of the remote control decreases.
•Remove the batteries if the remote control is not to be used for an extended period of time.
•Do not use old batteries together with new ones.
•Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color.
•If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.
•Do not throw away batteries with general house waste; dispose of them correctly in accordance with your local regulations.
■Handling the remote control
•Do not spill water or other liquids on the remote control.
•Do not drop the remote control.
•Do not leave or store the remote control in the following types of conditions:
–high humidity, such as near a bath
–high temperature, such as near a heater or a stove
–extremely low temperatures
–dusty places
•Do not expose the remote control sensor to strong lighting, in particular, an inverter type fluorescent lamp; otherwise, the remote control may not work properly. If necessary, position the unit away from direct lighting.