Yamaha A-S300BL owner manual Specifications, 17 En, Audio Section, General, IPhone, iPod

SPECIFICATIONS

AUDIO SECTION

• Minimum RMS output power

(8 Ω, 20 Hz to 20 kHz, 0.019% THD)
[A-S500]	85 W + 85 W
[A-S300]	60 W + 60 W
(6 Ω, 20 Hz to 20 kHz, 0.038% THD) [Except for Asia model]
[A-S500]	100 W + 100 W
[A-S300]	70 W + 70 W
• Dynamic power per channel (IHF) (8/6/4/2 Ω)
[A-S500]	130/150/185/220 W
[A-S300]	100/120/140/150 W

•Maximum power per channel [U.K. and Europe models only] (1 kHz, 0.7% THD, 4 Ω)

[A-S500]	120 W
[A-S300]	95 W

•IEC power [U.K. and Europe models only] (1 kHz, 0.019% THD, 8 Ω)

[A-S500]		100 W
[A-S300]		75 W
• Power band width
[A-S500]	(0.06% THD, 42.5 W, 8 Ω)	10 Hz to 50 kHz
[A-S300]	(0.06% THD, 30 W, 8 Ω)	10 Hz to 50 kHz
• Damping factor (SPEAKERS A)
1 kHz, 8 Ω		240 or more

• Maximum effective output power (JEITA)

(1kHz, 10% THD, 8 Ω) [Asia, China, Taiwan and Central/South

America models only]
[A-S500]	130 W
[A-S300]	100 W
(1kHz, 10% THD, 6 Ω) [China, Taiwan and Central/South
America models only]
[A-S500]	150 W
[A-S300]	110 W
• Input sensitivity/Input........................................................impedance	3.0 mV/47 kΩ
PHONO (MM)
CD, etc	200 mV/47 kΩ
• Maximum input signal
PHONO (MM) (1 kHz, 0.003% THD)	60 mV or more
CD, etc. (1 kHz, 0.5% THD)	2.2 V or more
• Output level/Output impedance	200 mV/1.0 kΩ or less
REC

•PHONES jack rated output/Impedance CD, etc. (Input 1 kHz, 200 mV, 8 Ω)

[A-S500]	.............................................................	430 mV/470 Ω
[A-S300]	.............................................................	360 mV/470 Ω
• Frequency response
CD, etc. (20 Hz to 20 kHz)		0 ± 0.5 dB
CD, etc. PURE DIRECT on (10 Hz to 100 kHz)		0 ± 1.0 dB
• RIAA equalization deviation
PHONO (MM)		± 0.5 dB
• Total harmonic distortion
PHONO (MM) to REC (20 Hz to 20 kHz, 3 V)		0.025% or less
CD, etc. to SPEAKERS
[A-S500]	(20 Hz to 20 kHz, 42.5 W, 8 Ω)	0.015% or less
[A-S300]	(20 Hz to 20 kHz, 30 W, 8 Ω)	0.015% or less
• Signal to noise ratio (IHF-A network)
PHONO (MM) (5 mV input shorted)		88 dB or more
CD, etc. PURE DIRECT on
(200 mV input shorted)		100 dB or more
• Residual noise (IHF-A network)		30 µV

• Channel separation
CD, etc. (5.1 kΩ input shorted, 1/10 kHz)	65/50 dB or more
• Tone control characteristics
BASS
Boost/Cut (50 Hz)	±10 dB
Turnover frequency	350 Hz
TREBLE
Boost/Cut (20 kHz)	±10 dB
Turnover frequency	3.5 kHz
• Continuous loudness control
Attenuation (1 kHz)	–30 dB
• Gain tracking error (0 to –99 dB)	0.5 dB or less

GENERAL

• Power supply
[U.S.A. and Canada models]	AC 120 V, 60 Hz
[Asia model]	AC 220-240 V, 50/60 Hz
[Taiwan and Central/South America models]
.............................................. AC 110-120/220-240 V, 50/60 Hz
[China model]	AC 220 V, 50 Hz
[Australia model]	AC 240 V, 50 Hz
[U.K., Europe and Russia models]	AC 230 V, 50 Hz
• Power consumption
[A-S500]
[U.S.A. and Canada models]	240 W, 330 VA
[Asia model]	220 W
[Other models]	240 W
[A-S300]	190 W
• Standby power consumption	0.5 W or less
• YID-W10 standby power consumption
(YID-W10 connect)	1.2 W or less
• iPod charge power consumption
[A-S500]	35 W or less
[A-S300]	25 W or less

•Maximum power consumption [Taiwan and Central/South America

models only]

(6 Ω, 1 kHz, 10% THD)

[A-S500]	510 W
[A-S300]	400 W
• Dimensions (W ⋅ H ⋅ D)	435 ⋅ 151 ⋅ 387 mm
	(17-1/8" ⋅ 6" ⋅ 15-1/4")
• Weight
[A-S500]	10.3 kg (22.7 lbs)
[A-S300]	9.0 kg (19.8 lbs)

Specifications are subject to change without notice.

iPhone, iPod

iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

INFORMATION ADDITIONAL

17 En