CONTROLS AND FUNCTIONS
Front panel and Remote control
1 A (POWER)
Front panel: A switch
Turns on and off the power of this unit.
On position: Pushed inward
Off position: Released outward
Remote control: A button
When this unit is turned on: turns this unit on or sets it to standby mode.
Note
This unit consumes a small amount of power even when turned off or when in standby mode.
2 POWER on indicator Lights up as follows:
Brightly lit: | Power is on |
Dimly lit: | Standby mode |
Off: | Power is off |
y
The POWER on indicator remains brightly lit while an iPhone/ iPod is being charged, even if this unit is in standby mode.
3 Infrared signal transmitter
Sends signals to the main unit.
4 Remote control sensor
Receives signals from the remote control.
5 INPUT selector and indicators
Select the input source you want to listen to. The input source indicators light up when the corresponding input sources are selected.
y
The input source names correspond to the names of the connection jacks on the rear panel.
2 En