Assigning and uploading the control function to Roboremote
Assigning and uploading the control function to Roboremote
After you create your control function, you will need to assign it to a button on the Roboremote in the software, and then upload the control function to your Roboremote. To do so:
a.Load the control function you want to assign, or if already have one
loaded in the in interface, press on Store to Roboremote 
button. A virtual Roboremote will appear.
b.On the virtual Roboremote, select the button to which you want to store your control function. Press on the virtual shift button to save to a different shift level.
You can toggle shift levels to store up to 12 different control functions.
c. Click on the OK button to save to your Roboremote.
14